5.3 Initialization
This model has a Initialization Mode, where the technician can initial the EEPROM.
Preliminary
1.To access the Bebbug Mode, the TV must be running.
Procedure | ① | ② |
6.Press and hold the #4 and #5 button (VOLUMES and VOLUME T).
7.While continuing to hold the #4 and #5 button, press and hold the #1 button
8.After both buttons have been held down for five (5) seconds, first release the #1 button, then release the #4 and #5 button.
9.As stated previously, the input that the TV had selected at the time will determine which actual INITIALIZATION display will show up. (See below)
16
Downloaded From
