INSTALLATION INSTRUCTIONS

Installation

WARNING

Use one of the special mount units to install this product. A mount of insufficient strength or inadequate design can cause overturning or dropping and result in fire, electrical shock or injury. Please note that our company assumes absolutely no responsibility for personal injuries or property damage caused by use of other mount units or improper installation.

CAUTION

10cm (4 inches) or more*

 

Installation of the wall mount unit and ceiling mount unit can be dangerous, so do not attempt this work yourself. Ask your dealer to provide the name of a qualified installer.

• In order to prevent an internal temperature increase, maintain a space of 10cm (4 inches : For a desktop set-Clamp up) or more between the sides and other objects such as walls, etc., so that the ventilation holes are not

blocked.()

Cord

or

chain

ENGLISH

Anti-tumble measures

CAUTION

Have this unit mounted in a stable place. Take measures to prevent it from tumbling down to avoid possible physical injury.

Securing to a wall or pillar

Using a commercially available cord, chain and clamp, secure the set to a firm wall or pillar.

 

Hook

Chain

cord or chain

 

Wall or Pillar

 

clamp

Securing desktop

1)Using wood screws (two), fasten the set to the clamping screw holes on the rear of the stand as shown.

2)Using commercially available wood screws, secure the set firmly in position.

Wood screw

Two places

11

Page 11
Image 11
Hitachi 28LD5000TA Installation Instructions, Anti-tumble measures, Securing to a wall or pillar, Securing desktop