Video Unit Function | Hitachi 28LD5000TA specs

Video Unit Function

INSTALLATION INSTRUCTIONS

Connecting to a Video Imaging Device

(1)Make sure that the power switch of the monitor is turned off.

(2)Make sure that the power switch of the imaging device is turned off.

(3)Use a commercially available cable and connector to connect the signal input terminal on the rear panel of this device and the signal output terminal of the imaging device.

To audio input terminals	To composite input terminal
	VCR

Monitor rear panel

Speaker (R)

Speaker (L)

Power cord

DVD player							DVD player

To SCART terminal

Set-Top Box

To audio output terminals	To composite output terminal	To S video output terminal
	VCR

To component input terminals

To component output terminals

To audio output terminals

To SCART terminals

To RGB,

video and audio input terminals

[An example of connecting video imaging devices]

Use if the video equipment has an

S video

input terminal

With DVI-STB and RGB component setup

To component video equipments.

Please use the connection cable suitable for the terminal form of video equipment.

•If video equipment with an S video output terminal is used, cabling by the S video cable is recommended to provide finer video quality. (If the S video input terminal and the video input terminal of AV3 connect to the monitor at the same time, S video input would govern.)

•If the OUTPUT (MONITOR) terminal is connected to an external monitor with a 75 Ohm terminal, it is possible to view the same image as on the main unit. But it is possible to monitor only the composite video signal from AV1, AV2, AV3, or AV4 input that is displayed on the screen at the time.

Applicable video signals for each input terminal (See PRODUCT SPECIFICATIONS for details.							49 )
Terminal	RCA/SCART		DVI	D-sub	Remarks
Signal	CVBS S-video Component RGB	PC	STB	RGB Component
AV1
AV2					Refer to Setup Menu.	35
AV3
AV4					Refer to Setup Menu.	35
RGB1					Refer to Setup Menu.	36
RGB2					Refer to Setup Menu.	36
						(	: Available)

28

Image 28

Hitachi 28LD5000TA Video Unit Function, Connecting to a Video Imaging Device, With DVI-STB and RGB component setup

Contents

28LD5000TA 28 LCD TV Features Contents Safety Instructions About the Symbols Be cautious of the power cord connection Be sure to keep safety ground connectionBe careful in handling the battery of the remote control To Earth Fuse Blue to Neutral Cord Clamp Safety Instructions Precautions for the cable connection Precaution during transportationDo not physically impact the remote control Set the sound volume at a suitable level Component Names Main Unit Handling the Remote Control Remote controlLoading Batteries Component Names Remote control Eth Installation Instructions InstallationAnti-tumble measures Securing to a wall or pillar Connecting to a PC Monitor rear panel English Turning Power On and Off Indicating Power status OperatingOperating Instructions Indicating lamp Operating Instructions Volume Adjustment Input SwitchingVolume UP/DOWN buttons Audio Mute Size Switching Input Signal Screen DisplayDisplay area selection diagram RGB input Normal Full Zoom1 Real* Zoom3 Zoom2 Using the Menu Screen Operating InstructionsOn-screen display system Press the Return button to return to the previous screen Picture Menu Timer Menu Audio Menu Function Menu Setup Menu Other Features Language MenuAutomatic Store Select a language by Select buttons and press the OK button Other Features Signal Check Power Save ModeWhen the RGB, RGB2 input is selected Status Display Action About using in a low ambient temperature About screen defectsAbout residual images About the panel screen Troubleshooting Symptoms That Seemingly Appear to be FailuresSymptom Point to check Check the way the signal cable is connectedPage Troubleshooting Actions to Correct Abnormal Displays Connecting to a Video Imaging Device An example of connecting video imaging devicesWith DVI-STB and RGB component setup Video Unit Function Display size selection diagram Using a wide-screen monitor ZoomC149L and 149Zoom Position + Operating Instructions Displaying Multi Picture Activating the Split mode from the video input screenPictures Split YNR Operating Instructions Picture Menu Video Power Save Off Default Zoom Panoramic RGB System Colour SystemVideo Input AV2 1st step Previously recorded items will be lost During VCR special playback fast forward, rewind Symptom Point to check SeeOutput Tuner Unit funchion Buttons for Teletext ModeSUB page buttons Connecting Antenna Precautions when connecting the antenna Input Select button of the monitor or the remote control During TV modeAuto Full Zoom 149Zoom C149L Button Activating the Split mode from the TV screen Pictures Split 4 pictures 12 pictures Sound mode PicturesDisplay will go out in approximately 6 seconds TV position Name Freeze button Picture FreezingSplit Strobe During TV mode Menu Operating Instructions Setup Menu During Video signal input Other Functions A2 / Nicam / Sound MultiplexBilingual / Dual sound broadcast Stereo sound broadcast Operating Instructions Other Functions DVD Player SelectionExample Recall button Symptom Possible reason Remedy Snowy picture poor soundMultiple images sound O.K Intermittent interference Product Specifications Signal Input RGB terminal D-sub 15-pin connectorInput connector pin specifications Scart connector pin specifications Product Specifications Recommended Signal List Signal mode Horizontal Dot clock Remarks Resolution Vertical frequencyWith R, G, B Video input AV2 and AV4 input With component input AV1, AV2 and RGB2-component input This guarantee does not affect your statutory rights