OTHER FUNCTIONS
A2 / NICAM / Sound Multiplex
•The CH I / II button is only useful for NICAM and sound multiplex signals. Otherwise pressing this button will have no effect.
BILINGUAL / DUAL sound broadcast
When bilingual program is received, sound mode display appears in yellow as shown on right.
Press the CH I / II button to select the sound to be heard.
Each time the button is pressed, I, II or ▼ (force mono) appear cyclically on the screen. When receiving NICAM signals, NICAM display will appear as below.
8
NICAM [II]
Sound multiplex signal received
Yellow
[I]
Yellow | Green |
[II]
NICAM signal received Yellow NICAM [I]
Yellow | Green |
|
NICAM [II]
Select I, II or 
(force mono) to hear the CH I, CH II or MONO broadcast respectively.
STEREO sound broadcast
When a stereo program is received, sound mode display will appear in red, and you can press the CH I / II button to select between stereo and mono sound.
Each time the button is pressed, 
or ▼ (force mono)appear cyclically on the screen. When receiving NICAM signals, NICAM display will appear as below.
8
Sound multiplex signal received
Red
NICAM signal received
Green
NICAM 
Red
Green
Select 
or 
(force mono) to hear the STEREO or MONO broadcast respectively.
Monaural sound broadcast | 8 |
When a monaural program is received, sound mode display will appear in green.
You can press the CH I / II button to select the sound mode between monaural and forced mono (sound is same).
Each time the button is pressed, 
or ▼ (force mono) appear cyclically on the screen.
NOTE
•If sound signal is not strong enough for quality reception, press the CH I / II button until ▼ appears on the screen to receive a clear mono sound.
•If sound has hiss noise or keep switching between stereo and mono mode due to signal condition, press the CH I / II button until ▼ appears on the screen to receive a clear mono sound.
46
