Hitachi 32LD8800TA, 37LD8800TA user manual AV1

2-4-12

FUNCTION (continued)

Multi Picture Mode (continued)

2-picture mode (continued)

4.To switch to 4-picture mode, press once.

The 4-picture mode is displayed on the screen.

NOTE
									AV1
Each time 2-4-12		is pressed, the picture mode will be switched by following order.
									AV2
	2-Picture		2-Picture (1080i)*		4-Picture		12-Picture (TV mode only)
* When receiving 1080i format of component signal, there is a mode (2-Picture(1080i))										(Sub-
										screen)
which sub-screen is displayed inside of the large screen (Main-screen). Please
note that you cannot display the picture with component signal on Sub-screen.								[2-Picture (1080i) Mode]
5. To EXIT from the Multi Picture mode, press						button.
Next time you press				to activate the Multi Picture mode, it will start from 2-picture mode.

4-picture mode

You can watch 4 different pictures from live broadcasts and/or the external equipments at the same time.

NOTE

The audio comes out ONLY from side A.

You can change the channels or change Input modes on the side with ▼ (red triangle) mark.

1.To switch the ▼ location

The selected picture with red triangle mark

Press ◄►buttons on the remote control.

The ▼ mark will shift to side A and side B back-and -forth.

2.To change the channel

Make sure that ▼mark is located on the side you want to make changes.

+

Side A: Press P to select channels.

-

5

A

B1 8

B2 6

B3 11

Side B: Select the frame (B1~B3) that you want to make changes

with ▲▼buttons. The selected frame will be highlighted in green.

+

Press P buttons to select channels.

-

3.To change Input mode

Make sure that ▼mark is located on the side you want to make changes. Side A: Press Input Select buttons on the remote control.

Side B: Select the frame (B1~B3) that you want to make changes

with ▲▼buttons. The selected frame will be highlighted in green. Press Input Select buttons on the remote control.

41

LD8800TA-8ｔｈ-P40-P50.indd 41 2005/11/10 17:56:19