Hitachi 32LD8800TA, 37LD8800TA user manual Menu Operation Setup Menu RGB mode

MENU OPERATION (continued)

Setup Menu (RGB mode)

With this menu, you can adjust the display condition of the image which is inputting from the RGB terminals.

By pressing ▼button at the bottom of the 1st Setup menu page, the 2nd Setup menu page will appear on the screen.

Setup
	Auto Adjust			Adjust
	Horizontal Position		0
	Vertical Position		+31
	Horizontal Clock		–20
	Clock Phase		10
	Reset			Reset
	Select	Return			Exit

Setup
	Input Level		0.7V
	Frequency Display		Off
	WVGA Type		Off
	WXGA Mode		Off
	Vertical Filter		On
	Frequency Mode		PC
	Select	Set		Return

Selected Items		Setup hint
		Adjust Horizontal Position, Vertical Position, Horizontal
		Clock, and Clock Phase automatically.
		Press OK button to start auto adjustment.
Auto Adjust		The message “Auto Adjusting” is displayed.
		Depending on the type of the signal, there is a possibility
		that the display may not be adjusted in its optimum
		condition with this function. In that case, please adjust
		each item manually.
		Adjust the display position horizontally.
Horizontal Position*	-63~+63	When the position exceeds the possible range, the
		display color will turn into Magenta.
		Adjust the display position vertically.
Vertical Position*	-31~+31	When the position exceeds the possible range, the
		display color will turn into Magenta.
Horizontal Clock*	-31~+31	Minimize the vertical stripes on the screen.
		Minimize the blurring of the letters and stripes on horizon-
Clock Phase*	0~63	tal row.
		Make sure to adjust Horizontal Clock fi rst before
		adjusting Clock Phase.
Reset		Reset all the set values on this Menu page to original fac-
		tory settings.

25

LD8800TA-8ｔｈ-P25-P39.indd 25 2005/11/08 15:43:18