Hitachi 37LD8800TA BASIC OPERATION Power On/Off, To turn On the power of the monitor, English

NOTE

If the image does not appear on the screen at all, or have any problem, see TROUBLESHOOTING on 54 ~ 56 . It may help you to solve the problems.

You can turn ON the power only by pressing the Sub Power button during the Standby mode.

Do not switch the power On/Off repeatedly in a short period of time. It could cause malfunction.

To avoid sudden surges of electricity when the power comes back on, turn Off the main power of the unit before you leave if there is a blackout during use of the unit.

*About Power Save mode, see “Power Save Mode” and “When Following Messages Appear on the Screen” on for details.

and 54

52

BASIC OPERATION

Power On/Off

Now, turn On the main power of the unit. Make sure that the Power Cord has plugged into the wall socket.

To turn On the power of the monitor:

1. Press the Main Power switch on the monitor.

The Indicating Lamp will illuminates in Red (Standby mode).	Main Power switch (on the bottom surface)
	Sub Power button

2.Press Sub Power button either on the control panel or on the remote

control.

The color of the Indicating Lamp turns into Green, and the image will display on the screen.

To turn Off the power of the monitor:

Sub Power button

1.	Press Sub Power button either on the control panel or on the remote	CARD
		SD MEMORY
	control.
	The image disappears from the screen and the Indicating Lamp turns	PUSH-EJECT
	into Red (Standby mode).
		P
2.		P
	Press Main Power switch to completely turn Off the power of the unit.

OK

ENGLISH

	The Indicating Lamp Status Check		PH35814
Indicating Lamp	Power Status	Power Switch Status
Status
Off	Off	Main power → Off
Red	Standby mode	Main power → On
		Sub Power button → Off
Green	On	Main power → On
		Sub power button → On
Orange	Power Save mode*	Main power → On
		Sub Power button → On

18

LD8800TA-8ｔｈ-P1-P24.indd 18 2005/11/09 9:54:58