*Important: If a remote control button does not work when pressed, press the DVD button on the remote and try the button again.
■Forward/Reverse rapid scene search
➛Press FF/SLOW+ or REW/SLOW- during play.
➛Press PLAY to release.
•Starting forward/reverse search during play started from menu on Video CDs may recall menu.
•Search speed, slow at first, increases with each additional press of the button up to 5 levels.
■Forward/Reverse Chapter/Track Skip
➛ Press SKIP 
or 
during play. Each press skips a chapter (DVD) or track (Video CD/CD).
Pressing 
SKIP once midway through a chapter/track returns to start of that chapter/ track. Each additional press skips back one chapter/track.
•Pressing SKIP 
or 
during play started from menu on Video CDs may recall menu.
Chapter/Track Chapter/Track Chapter/Track Chapter/Track |
Reverse Skip 
Forward Skip
Current playback position
■Still (Pause) Picture
➛Press STILL/PAUSE during play.
➛Press PLAY to release.
•DVD/Video CD : The unit will enter Still picture mode.
•CD : The unit will enter Pause mode.
■Frame by Frame picture (DVD/Video CD)
➛ Press STILL/PAUSE in Still mode.
➛ Press PLAY to release.
•Each press advances picture one frame.
•Hold down for consecutive frame advance.
•Whether pictures are advanced by “FRAME” or “FIELD” is selected automatically (see page 60).
■Slow Motion picture (DVD/Video CD)
➛ Press FF/SLOW+ or REW/SLOW- (DVD only) in Still mode.
➛ Press PLAY to release.
•Slow motion speed, slow at first, is increased with each additional press of the button up to 5 levels.
•Reverse slow motion is not available for video CDs.
•When 
appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by the unit or the disc.
RESUME function
The unit memorizes the point where |
| |
STOP is pressed ( flashes on screen). | Basic | |
Press PLAY to resume play from this point. | ||
Pressing STOP again or opening the tray |
| |
cancels RESUME, however, RESUME is not | Operation | |
canceled when power is turned off and on. | ||
|
• RESUME works only with discs for which elapsed play time is displayed during play.
Auto-Power Off function
Power turns off after unit has been in Stop mode (DVD) for about 5 minutes.
Enjoy Video CDs featuring playback control without using menus (Video CDs only)
1.Do steps
2.Press number key(s) to select desired track (play begins).
•Check disc for track numbers.
•Press “1” to start at beginning of disc.
To Resume Menu use,
Press STOP, and press PLAY, then the menu appears. Now, go to step 4 (previous page).
Notes
•Please read the disc jacket for operation information.
•If a single sided disc is placed in upside down, “PLEASE CHECK THE DISC,
AND FOR STAINS OR SCRATCHES ON DISC” is displayed.
•Remove disc and press unit POWER off when not in use.
•Disc continues to rotate with menu displayed even after play is done. Press STOP to clear menu display when finished with menu.
21
