Panasonic PV DM2092 Playback Source, Recording Editing unit, Selecting Input Mode, Insert pre

*Important: If a remote control button does not work

Copy Your Tapes (Dubbing) when pressed, press the button on the remote and try the button again.

Connections you’ll need to make Recording (Editing) unit

Playing (Source) VCR
R-AUDIO-L VIDEO	IN FROM
OUT	ANT.	VIDEO IN L-AUDIO IN-R
MONO	OUT TO
IN
	TV

Playback (Source) Recording (Editing) unit

1	Insert pre-	Insert blank tape with
	recorded tape.	record tab.
		• Dubbing tapes protected
		with Copy Guard will have
		poor quality results.
2		Select “LINE” mode.
		See “Selecting Input Mode” below.
3	Press PLAY, then	Press REC, then
	press PAUSE at	press STILL/PAUSE
	starting point to put	immediately to put in
	in Standby mode.	Standby mode.

(Perform operation of steps 4 and 5 on both units at same time.)

4		Press PLAY	Press STILL/PAUSE
		to start dubbing.	to start dubbing.
5		Press STOP	Press STOP
	STOP	to stop dubbing.	to stop dubbing.

Basic Operation

Caution

•Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement.

•Please note that some tapes cannot be dubbed on this unit. Also, it is not possible to dub DVD/Video CD/CD to VHS tape using this unit.

Selecting Input Mode

Method 1:

Press CH . The display will change as follows.

	1	2	3
Method 2:			(CABLE)	(TV)
	LINE		125 or	69

aPress ACTION for MAIN MENU.

bPress to select “TV”, then press SET for SET UP TV screen.

cPress to select “INPUT SELECT,” and then press SET to select “TUNER” or “LINE.”

dPress ACTION twice to exit this mode.

19