Basic Installation
Pre-installation information for the 9120 telephone
The 9120 telephone is a
When two telephone lines are installed on the same phone jack, one tele- phone cord is required to connect both lines to your 9120 telephone.
When two telephone lines are installed on separate phone jacks, two tele- phone cords are required to connect both lines to your 9120 telephone. A second telephone cord will be required to connect both lines to your 9120 telephone.
If you want to combine two telephone lines onto one phone jack, contact your telephone company.
Basic Installation
1. Connect the Handset | 2.Connect the Cords |
Attach one end of the coiled handset cord to the handset and the other end to the handset port j on the back of the tele- phone.
Route the handset cord along the groove leading off the side of the telephone as shown in the illustration.
Plug one end of the telephone cord into 1 lon the back of the telephone and the other end to the phone jack.
Connect the small end of the power adaptor to the kport on the back of the telephone, and plug the other end into an electrical outlet.
1 
3. Attach the Stand for Desk Mount
If you plan to mount the telephone on the wall, you do not need to attach the stand.
Lower the stand as shown below into the slots on the back of the telephone.
Slide the stand in the direction shown below until it clicks into the locked position.
Technical Manuals Online! -
4
