Hitachi 37HLX99 Accessories, For U.S. models, Remote Control Battery Installation Replacement

BOTTOM VIEW

(Remote Control)

Press down and slide back to remove.

First time use

Accessories

Check to make sure you have the following accessories before disposing of the packing material.

￿ Remote Control	￿ Two “AA” size,	￿ Power Cord	￿ Power Swivel Cable
	1.5V batteries

￿ Table Top Stand

+

-

/

￿ 2 IR Blaster Cables

For U.S. models:

For optional accessories, please access our web site at: www.hitachi.us/tv

￿1 Ferrite Core (see page 14)

Note: Please visit our website for optional accessories.

CAUTION: 1. Ceiling mounting is not recommended. Mounting the panel on the ceiling does not provide adequate ventilation for the electronics or proper support for the front glass panel. This LCD television product is designed for a maximum tilting angle of 45 degrees from vertical.

2.This stand for use only with Hitachi 37HLX99. Use with other apparatus is capable of resulting in instability causing possible injury.

￿ Remote Control Unit CLU-3861WL	￿ Two IR Blaster cables (P# EY01641).
(Part No. HL02069).	￿ Power Swivel Cable (P# EW08432).
￿ Two “AA” size, 1.5V batteries (P# FQ00021).	￿ 1 Ferrite Core (P#2169513).
￿ Power Cord (P# EV01841).
￿ Table Top Stand (P# QJ02673 ).

REMOTE CONTROL BATTERY INSTALLATION

AND REPLACEMENT

1.Open the battery cover of the remote control by

pushing down and sliding the back cover off.

2.Insert two new “AA” size batteries for the remote control.

When replacing old batteries, push them

towards the springs and lift them out.

3.Match the batteries to the (+) and (-) marks in the battery compartment.

4.Replace the cover.

CAUTION: Do not insert batteries with the ‘+’and ‘-’ polarities reversed as this may cause the batteries to swell or rupture resulting in leakage.

4