Set The Quick Start Options, Reset The Software

Setup

Set The Quick Start Options

This feature will select QUICK START UP options. Set this feature to ON to have the TV tune channels (both Analog and Digital) quickly when first turning the TV on. Set this feature to OFF to save electricity. Selecting ON for the QUICK START UP feature will activate the TV tuners circuits when the TV is in “standby mode” which is commonly referred to as “off”. This will allow you to quickly tune to channels when first turning the TV on. Digital signals often change and this feature will monitor any changes and prepare the television to quickly present a picture. A small amount of electricity is used to continually monitor signals when this feature is selected.

Setup

Set The Menu Options

OR	Set The Power Saving

Set The Inputs

Set The Closed Captions

Set The Output Terminals

Set The Quick Start Options

Reset The Software

Move	SEL Select

Setup

Set The Quick Start Options

Select ON to have the TV tune channels quickly at 1st turn on.

Select OFF to save electricity

Off On

Move	SEL Select

NOTE: When setting the Quick Start option to ON the option of Reset TV Settings will not operate.

On-Screen Display

Reset The Software

This feature shows software information and easy upgrade procedure. This function allows the TV software to be upgraded by using a flash card (MMC CARD). If a future software upgrade is required for your TV, HITACHI will notify and provide you with a flash card. In order to receive written notification and the flash card, please complete and return the warranty card.