The Remote for VCR/PVR Functions
Remote Control
Operating the precoded function for your VCR/PVR (Personal Video Recorder).
This remote is designed to operate different types of VCRs/PVRs. You must first program the remote to match the remote system of your VCR/PVR (refer to
pages
1.Turn ON your VCR/PVR.
2.Aim the remote control at the front of your VCR/PVR.
3.To switch to VCR/PVR
SOURCE ACCESS buttons ( or ) on the remote control to position the LED light to the corresponding selection.
4. | Hold down the ENT button on the remote and enter |
| the four digit preset code that matches your |
| VCR/PVR, as shown on pages |
| ENT button. The indicator light will flash 3 times if |
| the code was accepted. |
5. | Aim the remote at the VCR/PVR and press the |
+
-
The
POWER button. The remote will turn off your PVR |
when the correct four digit preset code is entered. |
When this occurs, the remote control is |
programmed for your VCR/PVR. If the VCR/PVR |
does not turn off, try a different four digit preset |
code. |
6. The remote will now control your VCR/PVR. |
NOTE: 1. If your VCR/PVR cannot be operated after performing the above procedures, your VCR/PVR code has not been precoded into the remote.
2.In the unlikely event that your VCR/PVR cannot be operated after performing the above procedures, please consult your VCR/PVR operating guide.
3.The remote control will remember the codes you have programmed until the batteries are removed from the remote control. After replacing the batteries repeat the entire programming procedure as stated above.
PRECODED VCR/PVR Buttons
These buttons transmit the chosen precoded VCR/PVR codes.
EXCLUSIVE TV Buttons
These buttons are for operating the TV.
/
MY VCR/PVR CODE IS:
NOTE: Refer to instruction manual of the VCR/PVR for operation of the buttons exclusively for the VCR/PVR.
36
