LAMP REPLACEMENT

LAMP REPLACEMENT

1.Turn off the main power switch and unplug the power cord. Wait at least 30 minutes to allow the lamp to cool down before replacing it.

120V

FRONT COVER

PUSH

POWER

NOTE: THE LAMP IS VERY HOT AND MAY CAUSE FIRE OR SEVERE BURNS. WAIT AT LEAST 30~45 MINUTES TO ALLOW THE LAMP TO COOL BEFORE PROCEEDING WITH LAMP REMOVAL.

2.Remove the front cover from the TV set. This is held by a snap on. Pull the front cover outwards until the quick snap on disengages.

LAMP COMPARTMENT FRONT COVER

PULL

PUSH

NOTE: The lamp in this product contains Mercury. Dispose of properly in accordance with applicable environmental laws. For Recycling and Disposal information, contact your respective governmental agencies or the Electronic Industries Alliance at www.eiae.org (in the U.S.) or Electronic Product Stewardship Canada at www.epsc.ca (in Canada).

70

Page 70
Image 70
Hitachi 50V500, 60v500 important safety instructions 120V