Hitachi 60v500, 50V500 Connecting a Component Source to Input 1 or 2 Y-PBPR

CONNECTING EXTERNAL VIDEO DEVICES

CONNECTING A COMPONENT SOURCE TO INPUT 1 OR 2: Y-PBPR.

1.Connect the cable from the Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (Y) jack, as shown on the TV set below.

2.Connect the cable from the CB/PB OUT or B-Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (PB) jack.

3.Connect the cable from the CR/PR OUT or R-Y OUT of the laserdisc/DVD player or HDTV set top box to the INPUT (PR) jack.

4.Connect the cable from the AUDIO OUT R of the Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/R) jack.

5.Connect the cable from the AUDIO OUT L of the Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/L) jack.

6.Press the VID1 or VID2 button, to view the program from the Laserdisc/DVD player or HDTV set top box. The VIDEO OSD label disappears automatically after approximately four seconds.

7.Press the ANT button to return to the previous channel.

FIRST TIME USE

			DVD Player
		PR		OUTPUT
			PB	Y	L	R
ANT A
				DVI-HDTV
		PR	PB
TO	INPUT 1	R	(MONO)/L
CONVERTER
			PB	Y/VIDEO
ANT B	INPUT 2	R
			(MONO)/L
		R
				AUDIO
		R	(MONO)/L	VIDEO		S-VIDEO
AUDIO	INPUT 3
TO HI-FI
CENTER		R	(MONO)/L	VIDEO		S-VIDEO
IN	INPUT 4
IR
BLASTER
L		R	L	VIDEO		S-VIDEO
	MONITOR
	OUT
R		AUDIO

NOTES: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the connection is loose.

2.See page 13 for tips on REAR PANEL CONNECTIONS.

19