Hitachi 50VS810A, 70VS810, 60VS810A important safety instructions Accessories, Time Use, First

ACCESSORIES

Check to make sure you have the following accessories before disposing of the packing material.

TIME USE	REMOTE CONTROL	BATTERIES	OPTIONAL LCD REAR PTV STAND
		(“AA”)	(NOT INCLUDED, ORDER SEPARATELY)
FIRST	GUIDE
		2.
	C.C.	CLEANING CLOTH
			LCD TV MODEL	LCD STAND/PART NO.
			50VS810/50VS810A	SPF50 / QJ01521
			60VS810/60VS810A	SPF60 / QJ01581
			70VS810	SPF70 / QJ01591
	1.	3.	CUSTOM HITACHI TELEVISION STAND
			Excellent for VCR and video tape storage.

CAUTION: 1. This SPF50 LCD stand for use only with Hitachi 50VS810/50VS810A. Use with other apparatus is capable of resulting in instability causing possible injury.

2.This SPF60 LCD stand for use only with Hitachi 60VS810/60VS810A. Use with other apparatus is capable of resulting in instability causing possible injury.

3. This SPF70 LCD stand for use only with Hitachi 70VS810. Use with other apparatus is capable of resulting in instability causing possible injury.

1.Remote Control Unit CLU-3842WL (Part No. HL02062) or CLU-3844WL (Part No. HL02064).

2.Two “AA” size, 1.5V batteries (For Remote Control Unit).

3.Cleaning Cloth (P# MS00931).

REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT

1.Open the battery cover of the remote control by pushing the notched part of the cover with your fingers and pulling the cover off.

2.Insert two new “AA” size batteries for the remote control. When replacing old batteries, push them towards the springs and lift them out.

3.Match the batteries to the (+) and (-) marks in the battery compartment.

4.Replace the cover.

BOTTOM VIEW (Remote Control)

Lift up on tab to remove back cover.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace with the same or equivalent type.

4

Downloaded from www.Manualslib.com manuals search engine