Hitachi 50VS810A, 70VS810, 60VS810A Setup, On-Screen Display, Upgrades, Quick Start Up

SETUP

Upgrades

It shows software information and easy upgrade procedure. This function allows the TV software to be upgraded by using a flash card (MMC Card). If a future software upgrade is required for your TV, Hitachi will notify and provide you with a flash card. In order to receive written notification and the flash card, please com- plete and return the warranty card.

Setup

CableCARD Info Set AV Control

Upgrades

Quick Start Up

Move SEL Select

Setup
Upgrades
Software Version #: Main	VXX.XX
MMC Software Upgrade
Upgrade Now
Please insert MMC card
before upgrading.
Move SEL Select

Insert MMC card, then press the CURSOR PAD G, H to highlight “Upgrade Now”. Press the SELECT button to select and start upgrading.

NOTE: Any power interruption during the upgrade process will cancel the upgrade. When this happens, repeat the upgrade procedure.

Quick Start Up

This feature will select Quick Start Up options. Set this feature to ON to have the TV tune channels (both Analog and Digital) quickly when first turning the TV on. Set this feature to OFF to save electricity. Selecting ON for the Quick Start Up feature will activate the TV tuners circuits when the TV is in “standby mode” which is commonly referred to as “off”. This will allow you to quickly tune to channels when first turning the TV on. Digital signals often change and this feature will monitor any changes and prepare the television to quickly present a picture. A small amount of electricity is used to continually monitor signals when this feature is selected.

Setup

CableCARD Info

Set AV Control

Upgrades

Quick Start Up

Move SEL Select

ON-SCREEN DISPLAY

Setup

Quick Start Up

Select ON to have the TV tune channels quickly at 1st turn on.

Select OFF to save electricity.

Off On

Move SEL Select

68

Downloaded from www.Manualslib.com manuals search engine