Hitachi 70VS810, 50VS810A, 60VS810 Channel Manager, On-Screen Display, Signal Meter, Channel List

CHANNEL MANAGER

Signal Meter

Select Signal Meter when using an indoor or outdoor antenna. This feature will show the signal strength and peak values of the Antenna signal to help you adjust your antenna to optimize signal reception.

Chan. Manager

Set The Antenna Auto Chan. Scan

Signal Meter

Channel List

Move SEL Return

Chan. Manager
Signal Meter
Channel	:	3-
Strength	:	1
Peak	:	1
		Close
Move SEL	Return

Use the CURSOR PAD and the SELECT button to highlight and select “close” to exit.

NOTE: The Signal Meter will not be available (grayed out) when watching analog channels.

Channel List

This function allows you to review which channels are labeled (CH ID), which have been added to Channel Memory (SCAN), which are protected by LOCK and which are your Favorite (FAV) Channels.

Chan. Manager

Set The Antenna

Auto Chan. Scan

Signal Meter

Channel List

Move SEL Return

Channel List (Cable)
	CH#	Scan	CH ID	Lock
FAV	3	On	-------
FAV	4	On	-------
	5	On	-------
	6	On	-------
	7	On	-------
	8	On	-------
	9	On	-------
	10	On	-------
Move	/ SEL	Return

Use the CURSOR PAD to navigate the Channel List.

Press the CURSOR PAD (G, H) to select On or Off on the Scan column.

Press the EXIT button to return to normal viewing.

NOTE: When a CableCARD is installed, the Channel List will be dependent on channels agreed upon by you and your cable operator.

ON-SCREEN DISPLAY

53

Downloaded from www.Manualslib.com manuals search engine