Hitachi 70VS810 On-Screen Display, Audio Source, STEREO SELECTED 332 PM Ant A Stereo R

AUDIO

Audio Source

Multi-Channel Television Sound will allow you to select STEREO (a stereo broadcast), MONO (monaural sound) used when receiving a weak stereo broadcast or 2nd Audio Prog (SAP) which may be a secondary language, weather report, etc.

The sources received will be displayed at the top right edge of the TV. The source you select will be displayed above the sources received. See example below for each selection when both stereo and second audio are received (monaural is always received).

STEREO SELECTED

3:32 PM

Ant A 10-0

Stereo

R

SAP SELECTED

3:32 PM Ant A 10-0

SAP R

MONO SELECTED

3:32 PM

Ant A 10-0

Mono

R

Internal Speakers

Auto Noise Cancel

Perfect Volume

Loudness

This function is useful when setting up the external speakers. ON - Select this feature if using the internal speakers only.

TV as Center - Select this feature when setting up external speakers from a separate stereo system. The TV’s speakers will work as the center speaker.

OFF - Select this feature if you prefer to use only speakers from a separate stereo system.

This function eliminates the noise between stations. If a channel is tuned and is noisy, this function will automatically eliminate the audio for that channel.

This function will automatically adjust volume so each channel and input has the same average volume level.

This function turns loudness ON or OFF. It will improve the quality of both low and high frequency sounds when listening at low volume levels.

ON-SCREEN DISPLAY

49

Downloaded from www.Manualslib.com manuals search engine