Hitachi 65S700, 57S700, 51S700 important safety instructions Connecting External Video Sources

CONNECTING EXTERNAL VIDEO SOURCES

CONNECTING A COMPONENT SOURCE TO INPUT 1 OR 2: Y-PBPR.

1.Connect the cable from the Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (Y) jack, as shown on the TV set below.

2.Connect the cable from the CB/PB OUT or B-Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (PB) jack.

3.Connect the cable from the CR/PR OUT or R-Y OUT of the laserdisc/DVD player or HDTV set top box to the INPUT (PR) jack.

4.Connect the cable from the AUDIO OUT R of the Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/R) jack.

5.Connect the cable from the AUDIO OUT L of the Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/L) jack.

6.Press the VID1 or VID2 button, to view the program from the Laserdisc/DVD player or HDTV set top box. The VIDEO OSD label disappears automatically after approximately four seconds.

7.Press the ANT button to return to the previous channel.

FIRST TIME USE

			DVD Player
		PR		OUTPUT
			PB	Y	L	R
				DVI-HDTV			ANT C
		PR	PB	Y			(DTV)
ANT A
TO	INPUT 1
		R	(MONO)/L
CONVERTER
							IEEE1394
ANT B			PB	Y/VIDEO
	INPUT 2	R	(MONO)/L
				AUDIO			Multi Media
AUDIO							Card
TO HI-FI		R	(MONO)/L	VIDEO		S-VIDEO	OPTICAL OUT
	INPUT 3
CENTER							Digital Audio
IN
		R	(MONO)/L	VIDEO		S-VIDEO
	INPUT 4
	L
		R	L	VIDEO		S-VIDEO

RMONITOR

OUT

AUDIO

NOTES: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the connection is loose.

2.See page 12 for tips on REAR PANEL CONNECTIONS.

19