CHANNEL MANAGER

NOTES: 1. Auto Channel Scan must be performed first when using ANT C for the first time.

2.When in ANT C, only channels stored in Channel List during Auto Channel Scan can be tuned using the number buttons on the remote control (see pages 55-56).

3.When Source-Cable is selected, performing Auto Channel Scan in ANT C will also store scrambled channels in its memory. These channels will be shown as blank on the screen when the channel selector buttons on the remote control are used. Please use CHANNEL LIST menu to skip (Scan - Off) these scrambled channels

(see page 55).

4.Turning the power off while executing Auto Channel Scan will only store channels scanned before the power interruption.

5.If your ANT C source is an antenna, repeat Auto Channel Scan everytime antenna position/direction is changed.

6.Channel availability in ANT C depends on the broadcaster. Certain channels that are available during the day may not be available at night.

ON-SCREEN DISPLAY

54

Page 54
Image 54
Hitachi 57S700, 65S700, 51S700 important safety instructions Channel Manager