Hitachi AVC01U Selected Items, Setup hint, Video Resolution, Auto Movie Mode, 3D Comb Filter

On-Screen Display (continued)

Audio/Video

You can adjust some settings of the display and audio condition.

Select "Audio/Video" from Menu list.

Audio/Video

Channel Manager

Locks

Timers

Setup

Move SEL Select

OR

Audio/Video		Air/Cable
Video Resolution		1080p
Auto Movie Mode		On
3D Comb Filter		Off
Audio Source		Stereo
Audio Language		1[Unknown]
Digital Output		Dolby Digital
DRC		On
Lyp Sync[Analog]		0
Move	SEL Select

Selected Items			Setup hint
Video Resolution	1080p	You can make the selection for A/V Center output resolution,
	1080i	depending of your preference.
Auto Movie Mode	On	On: Automatically identifies if it is a movie and faithfully reproduces
	Off	the original film images.
		Off: Set to Off if the image does not look natural.
3D Comb Filter	On	This reduces the dot and color blurring in minute scales so that it can
	Off	reproduce purer color.
	Stereo	Multi-Channel Television Sound will allow you to select STEREO (a
Audio Source	Mono	stereo broadcast), MONO (monaural sound) used when receiving a
		weak stereo broadcast or SECOND AUDIO PROG (SAP) which may
	SAP	be a secondary language, weather report, etc.
Audio Language	1[English]	Some programs transmit more than one DTV language option. Most will
		have English as a default language. The language function will allow
	2~4[Others]
		you to select up to 4 language options (if available).
		This function allows you to select between Dolby®Digital and PCM.
		This setting is fed into Optical Output.
	*Dolby®Digital	Dolby®Digital Select this feature if the TV is connected to an amplifier/
			receiver with a Dolby®Digital only decoder; it will
Digital Output			provide six independent soundtrack channels through
			the optical output jack (Digital Audio).
		PCM	Select this feature if the TV is connected to an amplifier/
	PCM		receiver with a PCM only decoder; it will provide two
			independent soundtrack channels through the optical
			output jack (Digital Audio).
	On	Dynamic Range Compression.- Use this function to compress the
DRC		range of sound volume. By compressing the range of sound volume,
		it is possible not only to suppress the output of loud sound at night but
	Off
		also to raise the volume of low sound. The default setting is ON.
		Selecting this feature will allow you to synchronize the audio with
Lyp Sync	-2~+5	the picture signal. AUTO option automatically synchronize the audio
		and picture, if result is not satisfactory, please use the ◄► button to
		synchronize the picture and the audio signal manually. The default
		value is set to 0.

NOTE

*Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

27