COMPONENT NAMES
Main Unit
Front Panel
eq
w
qCabinet
wIndicating Lamp
ePower Off/On button
Rear Panel
q e
w e r
qAntenna Input
To switch between Cable and Air input, go to the Channel Manager option to change the signal source CABLE or AIR.
wAudio/Video inputs 1 and 2 (Composite)
eAudio/Video inputs 3 and 4 (Y-PB PR Components)
INPUTS 3 and 4 provide
NOTE
Your component outputs may be labeled Y,
Your component outputs may be labeled
It may be necessary to adjust TINT to obtain opti- mum picture quality when using the
rUSB Port(For S/W Upgrade only)
This slot is for future software upgrades. Hitachi will notify you if a software upgrade is required for your
A/V Center. In order to receive written notification, please complete and return your warranty card.
t y
tOptical Output
This jack provides Digital Audio Output for your audio device that is Dolby® Digital and PCM compatible, such as an audio amplifier.
NOTE
*Manufactured under license from Dolby Labora-
tories. “Dolby” and the
yHDMI Output(To UT Monitor)
The A/V Center HDMI output terminal (AV Out) is connected to the UT Monitor. Only one cable is used to transmit all video/audio/control signals, thus facilitating an easy connection. Moreover, the digital signals can produce high quality data without any degradation.
*Please refer to 14 ~ 15 for detailed information
regarding the connections.
11