BASIC OPERATION
Power On/Off
Turn On the power of the unit. | Indicating Lamp |
|
To turn On the power to the unit: |
1. Press the Power Switch on the A/V Center front or press |
the Power (On/Off) button on the remote control. |
The Indicating Lamp turns Blue.
The image will display on UT Monitor screen. | Power Switch |
| |
| (on A/V Center Front) |
To turn Off the power to the unit:
1. Press the Power (On/Off) button on the remote control.
The image disappears from the UT Monitor screen. The
Indicating Lamp turns Red (Standby mode).
Power On/Off button
2.Unplug the AC cord from the wall outlet to completely turn Off the power to the unit. The Indicating Lamp turns off.
NOTE
Due
ENGLISH
The Indicating Lamp Status
Indicating | Power Status | |
Lamp | ||
| ||
Off | Off | |
Red | Standby mode | |
Blue | On |
NOTE
If the image does not appear on the UT Monitor screen at all, or if there is any problem with it, see “TROUBLESHOOTING” on 35 ~ 36 . This may help you to solve the problems.
After turning On, it takes about 6 seconds until the A/V Center starts up. Please note that buttons on the remote control and the unit (such as the Power button) do not work during this period of time.
If power is interrupted during use of the unit, to avoid sudden surges of electricity when the power comes back on, unplug AC cord before leaving home.
16