Hitachi CP-S830W/E specifications Basic operations, To project the picture

Basic operations

To project the picture

	4		RESET
3			MENU	2	RIGHT
					RESET
		MUTE	INPUT		STANDBY/ON
			ON			MENU
		LAMP TEMP
	5	STANDBY/ON		7	￿ ￿	￿
					TIMER￿	VOL
					￿
			2		BLANK
				7	POSITION	MUTE
					VIDEO1/2	RGB1/2
	1				INPUT
1	Turn the MAIN POWER switch of the projector on.[ I : ON]
	∙ The ON indicator will light up orange.
2	Press the STANDBY/ON button.
	∙ The ON indicator blinks (green) and then lights (green).
	∙ The ON indicator will blink green during warm-up and light up.
	∙ Power cannot be turned on even if the STANDBY/ON button is pressed within 60 seconds after
	power is turned off, since the lamp has cooled preparing for next lighting.
3 Remove the lens cap.
4 Adjust picture size using the projection lens ZOOM knob.
5 Adjust focus using the projection lens FOCUS ring.
6	Power on all connected equipment.
	The method of connecting various equipment, see on the page 18~26.
7	Press the INPUT button or the INPUT SELECT (VIDEO or
	RGB) button to select the source of the signal to be projected

on the screen.

∙The selected signal input is displayed at the bottom right of the screen for 3 seconds.

Example on-screen display

RGB1

12