To turn off the power, Plug&Play | Hitachi CP-S830W/E specs

Basic operations (continued)

To turn off the power

RESET

3

		MENU		1	RIGHT
					RESET
		MUTE	INPUT		STANDBY/ON
		MUTE	INPUT
						MENU
		ON	TEMP
		LAMP	TEMP

		STANDBY/ON
					TIMER	VOL
					TIMER
		1
		1			BLANK
					POSITION	MUTE
					VIDEO1/2	RGB1/2
		2			INPUT
		2
1	Press the STANDBY/ON button, for 1 second.
1	∙ The ON indicator lights up orange and the lamp turns off. (About 1 minute later), the fan stops and
	the indicator blinks orange.
	∙ Press the STANDBY/ON button for short time (less than 1 second), the projector do not set in
	standby mode.
2 Turn the MAIN POWER switch of the projector off.[					: OFF]
3 Install the lens cap.
Caution		∙ To reduce temperature inside the projector (cooling down), fan will rotate for about 1 minute
Caution		after the lamp is turned off.
		after the lamp is turned off.

∙Do not turn off the MAIN POWER switch during the lamp on because the lamp is damaged.

PLUG&PLAY

This projector complies with VESA DDC1/2B specifications. PLUG&PLAY is a system with computer,

peripherals (including projectors), and operating system.

It works when the projector is connected to DDC (Display Data Channel) ready computer that is running

an operating system software that incorporates plug & play functionality.

(Only RGB 1)

ENGLISH

13

Image 13

Hitachi CP-S830W/E specifications To turn off the power, Plug&Play

Contents

Contents FeaturesOutline Operating Guide For the Customers in U.K Power cord Video signal cablesBefore use Instructions to Users Do not install this unit in an unstable place Do not look directly at the lens when Lamp is litDo not use power supplies other Than that specified If any abnormality occurs Cleaning Be careful in handling the power cordHandle the power cord carefully Do not step on this unit or do not put a Heavy object on it Clean inside the unit at least once two years When you are not going to use For a long timeDo not place this unit where it gets hot Volume Main unit Names and functions of each part Remote control sensor RGB input terminal AC in socket Main Power switchRGB output terminal Video input terminal Remote control transmitter Replace the cover How to insert batteries Example of the projector and screen installation InstallationHow to use foot adjusters View from the top To project the picture Basic operations PLUG&PLAY To turn off the power To return to the initial setting Adjustments and functionsMemory function Adjustment Item Details of adjustment SET UP Image Input Menu OPT. allows you to control communication function etc OPT Connection to the RGB signal terminal Connection to the video signal terminals Resolution Standard Display Dots Example of computer signalKHz Type Computer/signal Horizontal Timing µs Initial set signals Control signal terminal Connection to the control signal terminal ADB Mac mouse PS/2 mouseSerial mouse Control command table Control command tableCommunication Control data table Procedure of setting the Projector status Procedure of getting the Projector statusProcedure of default setting the Projector status Example of command error Connecting various equipment Example of system setup Clean the air filter using a vacuum cleaner Cleaning the air filter Remove the lamp cover How to replace lampLoosen two screws and pull Handle to remove Lamp.Screw Lamp Reset the lamp timeMessage table On-screen display When you think something wrong Specifications