MAINTENANCE (continued)

Replacing the Lamp

1. Switch the projector OFF, remove the power cord from the power outlet, and wait at least 45 minutes for the unit to cool.

2. Prepare a new lamp.

3. Check that the projector has cooled sufficiently, and gently turn it upside down.

4. Loosen the two screws as shown in the diagram, and remove the lamp cover.

5.Loosen the two screws, and gently remove the lamp while holding the grips. Touching the inside of the lamp case may result in uneven coloring.

6.Install the new lamp and tighten the two screws firmly. Also

steadily push the opposite side of the screwed lamp into the unit.

7. Replace the lamp cover in position and tighten the screw firmly.

8. Gently turn the projector right-side up.

CAUTION • Ensure that screws are tightened properly. Screws not tightened fully may result

in injury or accidents.

Do not use the projector with the lamp cover removed.

Resetting the Lamp Timer

Reset the lamp timer after replacing the lamp. When the lamp has been replaced after the LAMP indicator is red, or the CHANGE THE LAMP message is displayed, complete the following operation within ten minutes of switching power ON. The power will be turned off automatically in over 10 minutes.

1.Switch power ON, and press the RESET button, for approximately three seconds. The ‘LAMP xxxx hr’ message will appear on the lamp timer on the bottom of the screen.

2.Press the MENU button on the remote control transmitter, or the RESET button on the control panel, while the lamp timer is displayed. The ‘LAMP xxxx 0 CANCEL’ message will then appear.

3.Press the and select 0, and wait until the timer display is cleared.

NOTEDo not reset the lamp timer without replacing the lamp. Reset the lamp timer always when replacing the lamp. The message functions will not operate properly if the lamp timer is not reset correctly.

An air filter is attached to the optional lamp. Replace the filter after replacing the lamp.

ENGLISH-18

Downloaded from www.Manualslib.com manuals search engine

Page 19
Image 19
Hitachi CP-SX5500W manual Maintenance, Replacing the Lamp, Resetting the Lamp Timer

CP-SX5500W specifications

The Hitachi CP-SX5500W is a high-performance projector designed to meet the needs of various professional and educational environments. With its advanced features and cutting-edge technologies, this projector stands out for its ability to deliver superior image quality, ease of use, and robust performance.

One of the primary features of the CP-SX5500W is its brightness. With 5,500 lumens, this projector ensures vibrant and clear images even in well-lit rooms. This characteristic makes it particularly suitable for classrooms, conference rooms, and large venues where ambient light can be a challenge. Coupled with a high contrast ratio of 3000:1, the projector produces sharp and vivid images, enhancing the overall viewing experience.

The resolution of the CP-SX5500W is another significant aspect. It features a native XGA resolution of 1024x768 pixels, which allows for excellent detail in presentations, graphs, and videos. The projector is also compatible with various screen resolutions, including WXGA and SXGA+, ensuring versatility in different setups.

Technology plays a critical role in the performance of the CP-SX5500W. It utilizes 3LCD technology, which helps in delivering bright and colorful images, reducing the "rainbow effect" often associated with single-chip DLP projectors. This technology also ensures that colors appear natural and accurate, which is essential for professional presentations.

Another noteworthy characteristic of the CP-SX5500W is its flexibility in connectivity options. It comes with a range of input ports, including HDMI, VGA, and USB, allowing for easy connection to various devices such as laptops, Blu-ray players, and USB flash drives. Additionally, the projector supports wireless presentations, facilitating cable-free setups that enhance mobility and convenience.

The design of the projector also enhances its usability. It features an easy-to-navigate menu and a remote control, making it user-friendly for individuals of all technical backgrounds. Its compact size and lightweight construction allow for easy transport, making it an ideal choice for traveling professionals and educators.

Moreover, the Hitachi CP-SX5500W is designed with durability in mind. It incorporates advanced lamp technology, which extends the lamp’s life up to 5,000 hours in eco mode, reducing maintenance costs and downtime. This reliability makes it a suitable investment for organizations that demand consistent performance.

In conclusion, the Hitachi CP-SX5500W is a powerful and versatile projector that excels in delivering high-quality images in diverse environments. With its impressive brightness, excellent resolution, advanced 3LCD technology, and flexible connectivity options, it serves as an ideal solution for professionals and educators seeking a dependable projection system.