Hitachi CU-HD1000 operating instructions System Timing menu, PIX Display menu, SD-DTL menu

Function menu

SYSTEM TIMING menu

■ＳＹＳＴＥＭ ＴＩＭＩＮＧ
ＨＤ Ｈ ＰＨＡＳＥ ：		０（	０）
ＳＤ ＳＤＩ Ｈ Ｐ ：		０（	０）
ＳＤ ＳＤＩ Ｈ Ｐ ：１０８（			１７２８）
ＳＣ ＣＯＡＲＳＥ ：		０°
ＳＣ ＦＩＮＥ	：	０（	０）
ＳＤ Ｙ ＬＥＶＥＬ	：	０
Ｃ ＬＥＶＥＬ	：	０

Item	Setting	Factory setting	Description
HD H PHASE	-128(-512 )to +127(511)	0	Adjust HD-SDI output phase to VBS.
SD SDI H P	-128(-256 )to +127(255)	0	Adjust SD-SDI output phase to VBS
SD VBS H P	-128(-2048 )to +127(2047)	108( 1728)	Adjust VBS output phase to genlock signal.
SC CORSE	0°,90°,180,°270°	0	Adjust quarter phase of VBS subcarrier to
			genlock (black burst) signal.
SC FINE	-128(-512 )to +127(511)	0	Adjust fine phase of VBS subcarrier to genlock
			(black burst) signal.
SD Y LEVEL	-128 to +127	0	Adjust the VBS luminance level.
SD C LEVEL	-128 to +127	0	Adjust the VBS chrominance level.

PIX DISPLAY menu

■ＰＩＸ ＤＩＳＰＬＹ

ＦＩＬＴＥＲ	：ＯＮ
ＥＣＣ	：ＯＮ
ＩＲＩＳ	：ＯＮ

SD-DTL menu

■ＳＤ ＤＴＬ
ＳＤ ＤＴＬ	：ＯＮ
Ｈ ＧＡＩＮ	：	０
Ｖ ＧＡＩＮ	：	０
Ｈ ＣＲＩＳＰ	：－１２８
Ｖ ＣＲＩＳＰ	：－１２８
ＤＴＬ ＦＲＥＱ	：５ＭＨｚ
ＬＥＶＥＬ ＤＥＰ	：－１２８

ＬＥＬ ＤＥＰ ＳＬＰ：－１２８

Item	Setting	Factory setting	Description
FILTER	OFF, ON	ON	Sets the types of the PIX OUT optical filter display and
	ON/OFF		ECC filter display.
			For details, see the filter display below.
ECC	OFF,ON	ON	Display the Electric Color Correction filter.
IRIS	OFF, ON	ON	Display the F-value of the lens iris.

Item	Setting	Factory setting	Description
SD DTL	OFF,ON	ON	Enable the DTL function of SDTV.
H GAIN	-128 to +127	0	Adjust the SDTV Horizontal DTL level.
V GAIN	-128 to +127	0	Adjust the SDTV Vertical DTL level.
H CRISP	-128 to +127	-128	Set the operation threshold level of horizontal DTL in
			order to prevent to emphasize noise.
V CRISP	-128 to +127	-128	Set the operation threshold level of vertical DTL in
			order to prevent to emphasize noise.
DTL FREQ	4MHz,5MHz,6MHz,	5MHz	Set the Horizontal DTL boost frequency.
	7MHz,8MHz
LEVEL DEP	-128 to +127	-128	Dark component DTL level adjustment slice.
LEV DEP SLP	-128 to +127	-128	Dark component DTL level adjust slope.

12