Hitachi operating instructions Input output signals CU-HD1000, Input signals

Specifications

yPower supply voltage	CU-HD1000J		AC100V 50/60Hz
	CU-HD1000U		AC117V 60Hz
	CU-HD1000E		AC230V 50Hz
yPower consumption	210W approx. (AC operation, including SK-HD1000,VF-402 and utility POWER)
yAmbient Temperature	Operating:	0 to +40℃
	Storage:	-20 to +60℃
yDimensions	216(W)°118(H)°400(D)mm
yMass	7kg approx.
yMax. Cable length	1km

■Input output signals (CU-HD1000)

Input signals

GEN LOCK IN	B-BST 0.45Vp-p/75Ω(loop through)	BNC
	HDTV tri-level sync 0.60Vp-p/75Ω
	(loop through)
DIGITAL RET IN1/2/3/4	HD SDI(1080i,720p) or SD SDI	BNC
	*HD SDI input is same as output format
	・1080i : SMPTE292M
	・720p : SMPTE296M
	・SD-SDI : SMPTE259M
ANALOG RET IN1/2	VS or VBS 1.0Vp-p/75Ω(loop through)	BNC
PROMPT IN	VS or VBS 1.0Vp-p/75Ω(loop through)	BNC
INTERCOM(HEAD SET)	-60dBm	XLR-5pin(Female)
COMMUNICATION		D-sub 15pin
・INTERCOM	0dBm , 600Ωat 4Wire
	0dBu or -15dBu ,200Ωat 2Wire
・PGM	0dBm/600Ω
・R/G TALLY	Voltage or contact supply
REMOTE 1	1.5Vp-p or	4pin
REMOTE 2	1.5Vp-p	4pin
RS-232C	9600 baud	D-sub 9pin

25