18-93 | Cisco Systems ONS 15600 SDH specs

Chapter 18 DLPs F300 to F399

DLP- F382 Grant Superuser Privileges to a Provisioning User

Step 6 Return to your originating procedure (NTP).

DLP-F382 Grant Superuser Privileges to a Provisioning User

	Purpose			This task enables a provisioning-level user to perform tasks such as
				retrieving audit logs, restoring databases, and activating and reverting
				software loads.
	Tools/Equipment			None
	Prerequisite Procedures			DLP-F181 Log into CTC, page 16-34
	Required/As Needed			As needed
	Onsite/Remote			Onsite or remote
	Security Level			Superuser only

Step 1	In node view, click the Provisioning > Defaults tabs.
Step 2	In the Node Defaults area, choose NODE. security.grantPermission.*.
Step 3	Click in the Default Value column for the default property you are changing and choose Provisioning
	from the drop-down list.

	Note		If you click Reset before you click Apply, all values will return to their original settings.

Step 4	Click Apply.

A pencil icon appears next to the default name that will be changed as a result of editing the defaults file.

Note You must close your current CTC session and restart a new CTC session for the changes to take effect.

Step 5 Return to your originating procedure (NTP).

DLP-F383 Download an Alarm Severity Profile

Purpose	This task downloads a custom alarm severity profile from a network-drive
	accessible CD-ROM, floppy disk, or hard disk location.
Tools/Equipment	None
Prerequisite Procedures	DLP-F181 Log into CTC, page 16-34
Required/As Needed	As needed
Onsite/Remote	Onsite or remote
Security Level	Provisioning or higher

		Cisco ONS 15600 SDH Procedure Guide, R8.0
		Cisco ONS 15600 SDH Procedure Guide, R8.0
	October 2007			18-93
	October 2007			18-93

Image 93

Cisco Systems ONS 15600 SDH manual DLP-F382 Grant Superuser Privileges to a Provisioning User, 18-93

Contents

18-1 DLP-F300 Install Fiber-Optic Cables for Sncp Configurations 18-2 DLP-F302 Change Tunnel Type DLP-F303 Delete Overhead Circuits Click the Provisioning Overhead Circuits tabs18-3 18-4 DLP-F304 Repair an IP Tunnel 18-5 J1 Function Cards Selecting the Edit Path Trace Option 18-6 18-7 DLP-F306 Provision Path Trace on STM-N Ports Click Circuits18-8 Click the Login Node Group tab DLP-F307 Create Login Node GroupsClick Create Group 18-9 18-10 Tools 18-11 DLP-F310 Change the JRE Version 18-12 DLP-F311 Remove Pass-through Connections DLP-F312 Delete a Node from a Specified Login Node Group DLP-F313 Change a Circuit Service State18-13 18-14 DLP-F314 Provision MS-DCC Terminations 18-15 Node view, click the Provisioning Comm Channels MS-DCC tabs DLP-F315 Provision a Proxy Tunnel Click the Provisioning Network Proxy subtabs18-16 DLP-F316 Provision a Firewall Tunnel Click the Provisioning Network Firewall subtabs18-17 DLP-F317 Delete a Proxy Tunnel DLP-F318 Delete a Firewall Tunnel18-18 DLP-F320 Change an MS-DCC Termination DLP-F319 Change an RS-DCC TerminationClick the Provisioning Comm Channels RS-DCC tabs Click the Provisioning Comm Channels MS-DCC tabs DLP-F322 Delete an MS-DCC Termination DLP-F321 Delete an RS-DCC TerminationNode view, click the Provisioning Comm Channel RS-DCC tabs 18-20 18-21 Click the Provisioning Comm Channel MS-DCC tabs DLP-F324 Provision Asap Ethernet Ports Click the Provisioning Ethernet Ports tabs18-22 Click the Performance Ethernet Ether Ports Statistics tabs DLP-F325 Provision Asap POS PortsClick the Provisioning Ethernet POS Ports tabs 18-23 Click the Performance Ethernet POS Ports Statistics tabs DLP-F326 View Asap STM-N PM ParametersClick the Performance Optical tabs Figure 18-24 18-25 DLP-F327 View Asap Ether Ports Statistics PM Parameters Ether Ports Statistics in the Card View Performance Window 18-26 18-27 DLP-F328 View Asap Ether Ports Utilization PM Parameters 18-28 DLP-F329 View Asap POS Ports Statistics PM Parameters 18-29 DLP-F330 View Asap POS Ports Utilization PM Parameters 18-30 DLP-F331 View Asap POS Ports History PM Parameters 18-31 DLP-F332 Change Node Access and PM Clearing Privilege 18-32 18-33 DLP-F333 Install the Asap Carrier Modules 18-34 DLP-F334 Verify Pass-Through Circuits 18-35 DLP-F335 Preprovision an SFP 18-36 DLP-F336 Print CTC Data 18-37 DLP-F337 View Asap Ether Ports History PM Parameters 18-38 Click the Provisioning MS-SPRing tabs Click Create MS-SPRing18-39 18-40 DLP-F339 Create a Two-Fiber MS-SPRing Manually 18-41 DLP-F340 Change an MS-SPRing Node ID 18-42 DLP-F341 MS-SPRing Exercise Ring Test 18-43 DLP-F342 MS-SPRing Switch Test Click the Maintenance MS-SPRing tabs Click Retrieve18-44 18-45 18-46 DLP-F344 Initiate an MS-SPRing Manual Ring Switch DLP-F343 Provision an STM-N Circuit Route18-47 DLP-F345 Clear an MS-SPRing Manual Ring Switch Onsite/Remote Onsite Security Level Provisioning or higher18-48 18-49 DLP-F346 Create an MS-SPRing on a Single Node 18-50 DLP-F347 Initiate an MS-SPRing Force Ring Switch 18-51 DLP-F348 View Circuit Information DRI 2F-PCAPCA Sncp 18-53 Pendingmerge Droppending18-54 18-55 11 Connecting Fiber to a Four-Node, Two-Fiber MS-SPRing 18-56 DLP-F350 Delete an MS-SPRing from a Single Node 12 Selecting Single Roll Attributes 18-57 14 Selecting a New Endpoint 18-58 15 Viewing the Rolls Tab 18-59 18-60 18-61 18-62 Click the Circuits tab 17 Selecting Dual Roll Attributes 18-63 18-64 18 Setting Roll Routing Preferences 18-65 18-66 18-67 18-68 DLP-F356 Delete a Roll Click the Circuits Rolls tabs18-69 DLP-F357 Cancel a Roll DLP-F358 Provision a Multirate PPM18-70 DLP-F359 Change the Optical Line Rate Click the Provisioning Pluggable Port Modules tabs18-71 18-72 DLP-F360 Delete a PPM 18-73 DLP-F361 Provision OSI Routing Mode Node view, click the Provisioning OSI Tarp Config tabs DLP-F362 Provision or Modify Tarp Operating Parameters18-74 18-75 Node view, click the Provisioning OSI Tarp Static TDC tabs Click Add Static Entry18-76 DLP-F365 Add a Tarp Manual Adjacency Table Entry Click Delete Static Entry18-77 Click the Provisioning OSI Routers Setup tabs DLP-F366 Provision OSI Routers18-78 DLP-F368 Enable the OSI Subnet on the LAN Interface DLP-F367 Provision Additional Manual Area Addresses18-79 DLP-F369 Create an IP-Over-CLNS Tunnel Click the Provisioning OSI Tunnels tabs18-80 18-81 DLP-F370 Remove a Tarp Manual Adjacency Table Entry 18-82 DLP-F371 Change the OSI Routing Mode 18-83 DLP-F372 Edit the OSI Router Configuration DLP-F374 Edit an IP-Over-CLNS Tunnel DLP-F373 Edit the OSI Subnetwork Point of AttachmentNode view, click the Provisioning OSI Routers Subnet tabs 18-84 18-85 DLP-F375 Delete an IP-Over-CLNS Tunnel 18-86 DLP-F376 View IS-IS Routing Information Base DLP-F377 View ES-IS Routing Information Base DLP-F378 Manage the Tarp Data Cache18-87 18-88 DLP-F379 Export CTC Data 19 Selecting CTC Data for Export 18-89 18-90 DLP-F380 Configure the Node for Radius Authentication 20 Radius Server Tab 18-91 DLP-F381 Delete a Server Trail Click the Provisioning Server Trails tabs18-92 DLP-F383 Download an Alarm Severity Profile DLP-F382 Grant Superuser Privileges to a Provisioning User18-93 18-94 18-95 DLP-F384 Install the Asap 1PIO and 4PIO PIM Modules 22 1PIO Module Faceplate 18-96 18-97 DLP-F385 Consolidate Links in Network View 18-98 24shows a network view with unconsolidated DCC and PPC links ALL Dwdm GCC, OTS, PPC TDM18-99 DLP-F386 Adjust the Java Virtual Memory Heap Size DLP-F387 Install an SFP/XFP18-100 18-101 DLP-F388 Remove an SFP/XFP 18-102 DLP-F389 Remove a 1PIO or 4PIO PIM Module Asap 4PIO DLP-F390 Provision an Optical Line Rate and Wavelength1PIO Click the Provisioning Optical Line tabs DLP-F391 Install Alarm Wires on the CAP/CAP2 CAP/CAP218-104 27 Rear of the ONS 15600 SDH, Including the CAP/CAP2 18-105 28 CAP/CAP2 Faceplate and Connections 18-106 18-107 DLP-F392 Change Line Transmission Settings for STM-N Cards SF BER SD BER18-108 18-109 Sonet Sets STU18-110 18-111 DLP-F393 Change Threshold Settings for STM-N Ports 18-112 18-113 DLP-F394 Change Optics Threshold Settings for STM-N Ports 18-114 Refresh DLP-F395 Change the STM-N Port ALS Maintenance Settings Click the Maintenance ALS tabs18-115 18-116 DLP-F396 Clear All PM Thresholds 18-117 DLP-F397 Provision the Designated Socks Servers 18-118 18-119 18-120