Cisco Systems ONS 15600 SDH manual 18-6, Selecting the Edit Path Trace Option

Chapter 18 DLPs F300 to F399

DLP- F305 Provision Path Trace on Circuit Source and Destination Ports

Figure 18-1 Selecting the Edit Path Trace Option

b.In the New Expected String field, enter the circuit source transmit string. Enter a string that makes the source port easy to identify, such as the node IP address, node name, circuit name, or another string. If the New Expected String field is left blank, the J1 transmits a string of null characters.

c.Click Apply, then click Close.

Step 7 Provision the circuit destination transmit string:

a.On the detailed circuit map, right-click the circuit destination port and choose Edit Path Trace from the shortcut menu (Figure 18-1).

b.In the New Expected String field, enter the string that you want the circuit destination to transmit. Enter a string that makes the destination port easy to identify, such as the node IP address, node name, circuit name, or another string. If the New Expected String field is left blank, the J1 transmits a string of null characters.

c.Click Apply.

Step 8 Provision the circuit destination expected string:

a.On the Circuit Path Trace window, enable the path trace expected string by choosing Auto or Manual from the Path Trace Mode drop-down list:

	Cisco ONS 15600 SDH Procedure Guide, R8.0
18-6	October 2007