Cisco Systems ONS 15600 SDH manual 18-112

Chapter 18 DLPs F300 to F399

DLP- F393 Change Threshold Settings for STM-N Ports

Step 1 On the shelf graphic, double-click the STM-16, STM-64, or ASAP card that you want to provision. The card view appears.

Step 2 As needed, complete the following:

a.Click Line, Section, Path, or Physical to provision the line, section, path, and physical options in Table 18-7for each STM-N port.

b.Change the selection to Near End/Far End, 15 Min/1Day as necessary.

c.Click Refresh to view or modify the thresholds for each selection.

Note Far End section thresholds are not available for the STM-64 card.

Table 18-7	SDH Threshold Options (Line, Section, and Path)
Heading	Description	Options
Port	Port number	1–16 for an STM-16 card, 1–4 for an STM-64
		card, 1-1-1 to 4-4-1 for an ASAP port number
CV	Coding violations	Numeric. Can be set for 15-minute or one-day
		intervals for Line, Section, or Path (Near and
		Far End). Select the bullet and click Refresh.
ES	Errored seconds	Numeric. Can be set for 15-minute or one-day
		intervals for Line, Section, or Path (Near and
		Far End). Select the bullet and click Refresh.
		Numeric. The defaults (15 min/1 day) are:
SES	Severely errored seconds	Numeric. Can be set for 15-minute or one-day
		intervals for Line, Section, or Path (Near and
		Far End). Select the bullet and click Refresh.
SEFS	Severely errored framing seconds	Numeric. Can be set for 15-minute or one-day
		intervals for Section (Near and Far End). Select
		the bullet and click Refresh.
FC	Failure count	Numeric. Can be set for 15-minute or one-day
		intervals for Line or Path (Near and Far End).
		Select the bullet and click Refresh.
UAS	Unavailable seconds	Numeric. Can be set for 15-minute or one-day
		intervals for Line or Path (Near and Far End).
		Select the bullet and click Refresh.
PSC	Protection Switching Count (Line)	Numeric. Can be set for 15-minute or one-day
		intervals for Line (Near End). Select the bullet
		and click Refresh.
PSD	Protection Switch Duration (Line)	Numeric. Can be set for 15-minute or one-day
		intervals for Line (Near End). Select the bullet
		and click Refresh.
PSC-W	Protection Switching Count	Numeric. Can be set for 15-minute or one-day
	(Working Line)	intervals for Line (Near End). Select the bullet
		and click Refresh.

	Cisco ONS 15600 SDH Procedure Guide, R8.0
18-112	October 2007