Cisco Systems ONS 15600 SDH 18-26, Ether Ports Statistics in the Card View Performance Window

Chapter 18 DLPs F300 to F399

DLP- F327 View ASAP Ether Ports Statistics PM Parameters

Step 1 In node view, double-click the card where you want to view PM counts. The card view appears. Step 2 Click the Performance > Ethernet > Ether Ports > Statistics tabs (Figure 18-4).

Figure 18-4 Ether Ports Statistics in the Card View Performance Window

Card View

Performance tab

Ethernet tab

Statistics tab

	6			159544
Refresh	Auto-refresh	Baseline	Clear	Help
button	menu	button	button	button

Step 3 Click Refresh. Performance monitoring statistics appear for each port on the card.

Step 4 View the PM parameter names appear in the Param column. The current PM parameter values appear in the Port # columns. For PM parameter definitions, refer to the “Performance Monitoring” chapter in the Cisco ONS 15600 SDH Reference Manual.

Note To refresh, reset, or clear PM counts, see the “NTP-F184 Change the PM Display” procedure on page 8-2.

Step 5 Return to your originating procedure (NTP).

	Cisco ONS 15600 SDH Procedure Guide, R8.0
18-26	October 2007