18-111 | Cisco Systems ONS 15600 SDH instruction

Chapter 18 DLPs F300 to F399

DLP- F393 Change Threshold Settings for STM-N Ports

Table 18-6	STM-N Card Line Settings (continued)

Heading		Description	Options

Band		(STM-64-4-DWDM card only) Sets	C
		the ITU band (in this case, C-band) for
		this card.

Wavelength		(ASAP and STM-64-4-DWDM card	ASAP card:
		only) Sets the wavelength frequency	•	First Tunable Wavelength
		(nm).	•	First Tunable Wavelength
		(nm).	•	1310
			•	1310
			•	1550
			•	1470
			•	1490
			•	1510
			•	1530
			•	1570
			•	1590
			•	1610
			Dense wavelength division multiplexing
			(DWDM) PPMs also have the following
			options:
			•	1530.33 to 1560.61
			•	ITU spacing

Step 4 Click Apply.

Step 5 Return to your originating procedure (NTP).

DLP-F393 Change Threshold Settings for STM-N Ports

Purpose	This task changes threshold settings for STM-N ports.
Tools/Equipment	None
Prerequisite Procedures	DLP-F181 Log into CTC, page 16-34
Required/As Needed	As needed
Onsite/Remote	Onsite or remote
Security Level	Provisioning or higher

Note For the default values and domains of user-provisionable card settings, refer to the "Network Element Defaults" appendix in the Cisco ONS 15600 SDH Reference Manual.

		Cisco ONS 15600 SDH Procedure Guide, R8.0
		Cisco ONS 15600 SDH Procedure Guide, R8.0
	October 2007			18-111
	October 2007			18-111

Image 111

Cisco Systems ONS 15600 SDH manual DLP-F393 Change Threshold Settings for STM-N Ports, 18-111

Contents

18-1 DLP-F300 Install Fiber-Optic Cables for Sncp Configurations 18-2 DLP-F302 Change Tunnel Type DLP-F303 Delete Overhead Circuits Click the Provisioning Overhead Circuits tabs18-3 18-4 DLP-F304 Repair an IP Tunnel 18-5 J1 Function Cards Selecting the Edit Path Trace Option 18-6 18-7 DLP-F306 Provision Path Trace on STM-N Ports Click Circuits18-8 18-9 DLP-F307 Create Login Node GroupsClick the Login Node Group tab Click Create Group 18-10 Tools 18-11 DLP-F310 Change the JRE Version 18-12 DLP-F311 Remove Pass-through Connections DLP-F312 Delete a Node from a Specified Login Node Group DLP-F313 Change a Circuit Service State18-13 18-14 DLP-F314 Provision MS-DCC Terminations 18-15 Node view, click the Provisioning Comm Channels MS-DCC tabs DLP-F315 Provision a Proxy Tunnel Click the Provisioning Network Proxy subtabs18-16 DLP-F316 Provision a Firewall Tunnel Click the Provisioning Network Firewall subtabs18-17 DLP-F317 Delete a Proxy Tunnel DLP-F318 Delete a Firewall Tunnel18-18 Click the Provisioning Comm Channels MS-DCC tabs DLP-F319 Change an RS-DCC TerminationDLP-F320 Change an MS-DCC Termination Click the Provisioning Comm Channels RS-DCC tabs 18-20 DLP-F321 Delete an RS-DCC TerminationDLP-F322 Delete an MS-DCC Termination Node view, click the Provisioning Comm Channel RS-DCC tabs 18-21 Click the Provisioning Comm Channel MS-DCC tabs DLP-F324 Provision Asap Ethernet Ports Click the Provisioning Ethernet Ports tabs18-22 18-23 DLP-F325 Provision Asap POS PortsClick the Performance Ethernet Ether Ports Statistics tabs Click the Provisioning Ethernet POS Ports tabs 18-24 DLP-F326 View Asap STM-N PM ParametersClick the Performance Ethernet POS Ports Statistics tabs Click the Performance Optical tabs Figure 18-25 DLP-F327 View Asap Ether Ports Statistics PM Parameters Ether Ports Statistics in the Card View Performance Window 18-26 18-27 DLP-F328 View Asap Ether Ports Utilization PM Parameters 18-28 DLP-F329 View Asap POS Ports Statistics PM Parameters 18-29 DLP-F330 View Asap POS Ports Utilization PM Parameters 18-30 DLP-F331 View Asap POS Ports History PM Parameters 18-31 DLP-F332 Change Node Access and PM Clearing Privilege 18-32 18-33 DLP-F333 Install the Asap Carrier Modules 18-34 DLP-F334 Verify Pass-Through Circuits 18-35 DLP-F335 Preprovision an SFP 18-36 DLP-F336 Print CTC Data 18-37 DLP-F337 View Asap Ether Ports History PM Parameters 18-38 Click the Provisioning MS-SPRing tabs Click Create MS-SPRing18-39 18-40 DLP-F339 Create a Two-Fiber MS-SPRing Manually 18-41 DLP-F340 Change an MS-SPRing Node ID 18-42 DLP-F341 MS-SPRing Exercise Ring Test 18-43 DLP-F342 MS-SPRing Switch Test Click the Maintenance MS-SPRing tabs Click Retrieve18-44 18-45 18-46 DLP-F344 Initiate an MS-SPRing Manual Ring Switch DLP-F343 Provision an STM-N Circuit Route18-47 DLP-F345 Clear an MS-SPRing Manual Ring Switch Onsite/Remote Onsite Security Level Provisioning or higher18-48 18-49 DLP-F346 Create an MS-SPRing on a Single Node 18-50 DLP-F347 Initiate an MS-SPRing Force Ring Switch 18-51 DLP-F348 View Circuit Information Sncp 2F-PCADRI PCA 18-53 Pendingmerge Droppending18-54 18-55 11 Connecting Fiber to a Four-Node, Two-Fiber MS-SPRing 18-56 DLP-F350 Delete an MS-SPRing from a Single Node 12 Selecting Single Roll Attributes 18-57 14 Selecting a New Endpoint 18-58 15 Viewing the Rolls Tab 18-59 18-60 18-61 18-62 Click the Circuits tab 17 Selecting Dual Roll Attributes 18-63 18-64 18 Setting Roll Routing Preferences 18-65 18-66 18-67 18-68 DLP-F356 Delete a Roll Click the Circuits Rolls tabs18-69 DLP-F357 Cancel a Roll DLP-F358 Provision a Multirate PPM18-70 DLP-F359 Change the Optical Line Rate Click the Provisioning Pluggable Port Modules tabs18-71 18-72 DLP-F360 Delete a PPM 18-73 DLP-F361 Provision OSI Routing Mode Node view, click the Provisioning OSI Tarp Config tabs DLP-F362 Provision or Modify Tarp Operating Parameters18-74 18-75 Node view, click the Provisioning OSI Tarp Static TDC tabs Click Add Static Entry18-76 DLP-F365 Add a Tarp Manual Adjacency Table Entry Click Delete Static Entry18-77 Click the Provisioning OSI Routers Setup tabs DLP-F366 Provision OSI Routers18-78 DLP-F368 Enable the OSI Subnet on the LAN Interface DLP-F367 Provision Additional Manual Area Addresses18-79 DLP-F369 Create an IP-Over-CLNS Tunnel Click the Provisioning OSI Tunnels tabs18-80 18-81 DLP-F370 Remove a Tarp Manual Adjacency Table Entry 18-82 DLP-F371 Change the OSI Routing Mode 18-83 DLP-F372 Edit the OSI Router Configuration 18-84 DLP-F373 Edit the OSI Subnetwork Point of AttachmentDLP-F374 Edit an IP-Over-CLNS Tunnel Node view, click the Provisioning OSI Routers Subnet tabs 18-85 DLP-F375 Delete an IP-Over-CLNS Tunnel 18-86 DLP-F376 View IS-IS Routing Information Base DLP-F377 View ES-IS Routing Information Base DLP-F378 Manage the Tarp Data Cache18-87 18-88 DLP-F379 Export CTC Data 19 Selecting CTC Data for Export 18-89 18-90 DLP-F380 Configure the Node for Radius Authentication 20 Radius Server Tab 18-91 DLP-F381 Delete a Server Trail Click the Provisioning Server Trails tabs18-92 DLP-F383 Download an Alarm Severity Profile DLP-F382 Grant Superuser Privileges to a Provisioning User18-93 18-94 18-95 DLP-F384 Install the Asap 1PIO and 4PIO PIM Modules 22 1PIO Module Faceplate 18-96 18-97 DLP-F385 Consolidate Links in Network View 18-98 24shows a network view with unconsolidated DCC and PPC links ALL Dwdm GCC, OTS, PPC TDM18-99 DLP-F386 Adjust the Java Virtual Memory Heap Size DLP-F387 Install an SFP/XFP18-100 18-101 DLP-F388 Remove an SFP/XFP 18-102 DLP-F389 Remove a 1PIO or 4PIO PIM Module Click the Provisioning Optical Line tabs DLP-F390 Provision an Optical Line Rate and WavelengthAsap 4PIO 1PIO DLP-F391 Install Alarm Wires on the CAP/CAP2 CAP/CAP218-104 27 Rear of the ONS 15600 SDH, Including the CAP/CAP2 18-105 28 CAP/CAP2 Faceplate and Connections 18-106 18-107 DLP-F392 Change Line Transmission Settings for STM-N Cards SF BER SD BER18-108 18-109 Sonet Sets STU18-110 18-111 DLP-F393 Change Threshold Settings for STM-N Ports 18-112 18-113 DLP-F394 Change Optics Threshold Settings for STM-N Ports 18-114 Refresh DLP-F395 Change the STM-N Port ALS Maintenance Settings Click the Maintenance ALS tabs18-115 18-116 DLP-F396 Clear All PM Thresholds 18-117 DLP-F397 Provision the Designated Socks Servers 18-118 18-119 18-120