Cisco Systems ONS 15600 SDH manual 18-58, Selecting a New Endpoint

Chapter 18 DLPs F300 to F399

DLP- F351 Roll the Source or Destination of One Optical Circuit

Figure 18-13 Selecting a Path

Step 8 Click Next.

Step 9 In the Select New End Point area, choose the Slot, Port, and VC3 or VC4 from the drop-down lists to select the Roll To facility (Figure 18-14).

Figure 18-14 Selecting a New Endpoint

Step 10 Click Finish. On the Circuits tab, the circuit status for the Roll From port changes from DISCOVERED to ROLL_PENDING.

	Cisco ONS 15600 SDH Procedure Guide, R8.0
18-58	October 2007