Hitachi DZ-BD7HA „ Choosing and playing back multiple scenes, Select a scene by pressing &/%

Choose a scene by pressing (/'(up/down, previous page/following page) and &/%(left/right).

•Holding down the button will increase the scene selection speed. Use the “Current scene number/Total number of scenes” display and the bar graph as reference.

Press the confirmation button.

The chosen scene is played back.

Playback is paused at the final frame of the last scene, and “+” (playback pause icon at the final frame) appears. When this condition continues for longer than five minutes, the display will automatically return to the disc navigation screen.

•To promptly return to the disc navigation screen, press or DISC NAVIGATION.

To return to recording pause mode, press the confirmation button.

•If you press the confirmation button while “+” is displayed, playback starts from the first scene.

HDD BD-RE BD-R RAM -RW (VR) -RW (VF) R CARD

„Choosing and playing back multiple scenes

After step of “Choosing and playing back a scene” (p.48), perform procedures according to your purpose from the table below. When you have finished choosing scenes, press the confirmation button to begin playing them back.

•You can utilize more than one method in the table below when choosing scenes.

•You can choose up to 999 scenes.

•The color of the frame(s) may change depending on your operations as follows:

–Yellow: indicates your current position (cursor frame)

–Red: indicates scenes already chosen

–Blue: indicates the range of consecutive scenes being selected

–2-color frame: includes the meaning of both colors

Select multiple scenes	Select a scene by pressing &/%/(/',
	then press SELECT.
individually
	Repeat this step to choose the next scene.
Using the current scene as	Press and hold SELECT until the cursor frame
your starting point, select	becomes blue.
multiple previous or	Choose a final scene by pressing &/%/(/',
succeeding consecutive	then press the confirmation button to confirm the
scenes	setting.

Viewing

49