Hitachi DZ-BD7HA, DZ-BD70A instruction manual 145, When the camcorder is connected to a PC

Symptom	Cause and Correction	Reference
		page
Photos on a card	This camcorder can play back image data recorded onto
cannot be played	memory card using other digital cameras conforming to
back.	DCF standards. However, depending on the recording
	condition of the image data taken by other digital
	cameras, blue thumbnails (see * of the illustration below)
	appear, and playback of these images may not be
	possible.
	DCF (Design rule for Camera File system) is a unified
	image file format for digital cameras. Image files	—
	recorded using digital devices conforming to DCF can be
	used in these devices interchangeably.

Fig. 1	Disc	Navigation
All Scenes			0010/0027
PLAY	SEL SELECT		EXIT

	*
It takes some time to	Stills with a large number of pixels will take more time to
play back photos on	appear.	—
card.

When the camcorder is connected to a PC

Symptom	Cause and Correction	Reference
		page
No drive icon	The camcorder is not turned on.	21
appears on the PC.	Check the power supply.
	Turn the PC off and disconnect the PC connection cable.	—
	Then turn the PC back on and reconnect the cable.
	Make sure the cable is connected properly to both the PC	119
	and the camcorder.
			Additional
An error occurs	Playing back Hi-Vision (HD) movies requires high data
while playing back	processing power. Quit other applications and play back
movies recorded on	again.	116
the camcorder using
the PC.			Information
The software does	Turn the PC and camcorder off, and try again.
not run correctly on		—
the PC.

145