Message

Cause & Troubleshooting

Reference

 

page

 

 

 

 

 

 

 

 

Check disc.

A disc unusable on this camcorder may have been

 

 

 

inserted or the disc may be damaged.

30, 105, 105

 

 

Make sure that the type of disc is correct, and that the

 

 

 

 

 

disc is not write-protected.

 

 

 

 

 

 

Check HDD.

Check to see whether the HDD is write-protected.

105

 

 

Otherwise, the HDD may be destroyed.

 

 

 

 

 

 

 

 

Control Information

Scenes may have been edited on another device, etc.

104

 

Error.

Update the control information.

 

 

 

 

 

 

 

 

Use another disc.

 

 

See *3 and *4 on p.139.

 

 

 

 

 

 

 

 

Disc error has

Use another disc.

 

occurred.

See *3 and *4 on p.139.

 

 

 

 

 

 

 

 

A mismatch in recording information may be caused

 

 

 

when editing is done on another device.

104

 

 

Format the disc or use another disc.

 

 

 

 

 

Formatting the disc will erase all data on it.

 

 

 

 

 

 

Disc error has

Disc error occurred during finalizing, and finalizing

 

 

occurred. Finalizing

failed. Replace the disc.

113

 

is not complete.

See *3 on p.139.

 

 

 

 

 

 

Disc error has

Was the disc formatted on a PC, or formatting

 

 

occurred. Format the

interrupted?

 

 

disc now?

Choose “YES” to format the disc. Formatting the disc

104

 

 

will erase all data on it.

 

 

 

See *2 on p.139.

 

 

 

 

 

 

Disc error has

The disc may be dirty.

 

 

occurred. Formatting

Remove the disc and wipe off fingerprints, dust, etc.,

 

 

is not complete.

before reusing it, or use another disc.

104, 153

 

 

This message may also appear if you insert a disc for

 

 

 

 

 

which formatting was interrupted midway. In this case,

 

 

 

try formatting the disc or use another one.

 

 

 

 

 

 

Disc error has

Disc error could have occurred during editing of scenes.

 

 

occurred. Keep Disc

Turn off the camcorder with the disc being used in it,

37

 

inside & restart.

connect AC adapter/charger, and then power the

 

 

 

 

camcorder again. Repair of scenes will be tried.

 

Additional

 

 

 

Disc error has

This message appears if a disc error has occurred during

24

 

 

occurred. Turn the

dubbing.

 

 

power switch off

Leave the disc inserted and turn the power off. Connect

 

 

once and then set it

the AC adapter/charger to the camcorder and set the

 

Information

to “BD/DVD”.

power switch to “BD/DVD”. The video file will be

 

 

 

 

repaired.

 

 

 

 

 

 

Disc error has

This message will appear when a disc error occurs during

 

 

occurred.

the unfinalization process. Replace the disc.

114

 

Unfinalizing is not

 

 

 

 

 

complete.

 

 

 

 

 

 

 

135

Page 135
Image 135
Hitachi DZ-BD7HA, DZ-BD70A instruction manual 135