Hitachi DZ-BD70A, DZ-BD7HA instruction manual Additional Information 144

Symptom	Cause and Correction	Reference
		page
Poor playback	Was the image input from an analog VCR (VHS, 8 mm)
picture.	and recorded?	—
	The problem may be improved if a VCR equipped with a
	TBC circuit is used for playback.
No sound.	If you are viewing images on a TV, is the TV volume	110
	control set correctly? Adjust the TV volume.
Not displayed	BD, DVD-RAM, DVD-RW(VR mode) recorded on this
normally in the disc	camcorder and edited on another device may not be
navigation screen.	displayed normally in the disc navigation screen. In this
	event, use “Update control info.”.
	If too much time is required to display the HDD disc
	navigation screen, try the following (DZ-BD7HA).
	1 Press DISC NAVIGATION, then press MENU.
	2 Select “Disc setting” or “HDD setting” (for the HDD of
	DZ-BD7HA) by pressing '/(, then press the
	confirmation button.	—
	The “Update control info.” confirmation screen
	appears.
	3 Select “YES” by pressing &, then press the
	confirmation button.
	Update of control information will begin. While
	“Updating...” is being displayed, a black screen may
	appear (and time may be required).
	(There are some BD/DVD which cannot be used even by
	following the above procedures.)
The disc navigation	If the inserted card contains more than 3,999 still
screen does not show	pictures, only 3,999 stills can be shown in the disc
more than 3,999	navigation screen. However, it is possible to play back	—
stills from the	more than 3,999 pictures.
inserted card.

Additional Information

144