Hitachi DZ-BD7HA, DZ-BD70A Turning Off Recording Indicator Beneath the Lens, LED Off/On

•Although the flash range differs according to the subject, as a reference, its range is about 3.2– 8.2 feet (1–2.5 m) in dark places.

•Although the amount of light emitted will automatically be adjusted at time of emission, the flash may not be sufficiently adjusted if the distance to the subject is too distant or too near.

•In bright or backlit conditions, it may be difficult to derive the full effect of the flash.

•When recording consecutive shots using the flash, the flash may not fire or the amount of light emitted may not be sufficiently adjusted. After using the flash to record, it is recommended that you wait for a while and then press PHOTO to record again.

•Do not emit the flash close up in front of a person’s eyes. Doing so may cause eyesight damage.

Particularly when recording infants using the flash, record at a distance greater than 3.2 feet (1 m) away.

•Do not fire the flash at the driver/ rider of a moving vehicle or bicycle, etc. Doing so will temporary blind the driver and may result in accident.

•Do not use the flash in locations where flammable or combustible gas is present. Doing so may cause the gas to ignite or explode.

HDD BD-RE BD-R RAM -RW (VR) -RW (VF) R

Turning Off the

Recording Indicator

Beneath the Lens

The recording indicator beneath the lens lights red while recording to indicate that you are recording.

You can turn the indicator off when recording through reflective objects such as glass or a fish tank, etc., so its reflection is not recorded.

Turning Off/On the recording indicator

1During recording pause, press MENU.

2Select “Initial Setup” “Record

LED” “Off”/”On”

Press the confirmation button to confirm, then MENU to end.

• The recording indicator setting

is not displayed in the on-

3screen information.

•Even if the recording indicator is set to “Off”, it will still light while the self-timer is counting down (p.77).

Various Recording Techniques

75