Select “Yes”, then press the confirmation button.

When using the HDD/BD-RE/ DVD-RAM/Card, formatting will start.

When using a DVD-RW disc, a screen for prompting you to select the VF mode or VR mode will appear. See p.35.

4* If you choose “VR mode” when formatting a DVD-RW (VR mode), finalization will not be canceled. All contents on the disc will be erased after being formatted and the disc will be a finalized DVD-RW (VR mode) and recordable.

If you choose “VF mode” above, finalization will be canceled.

• Select “No” to quit formatting.

Notes

It may not be possible to format a dirty or scratched disc. Such a disc cannot be used.

This camcorder may not recognize some discs or cards that were formatted on a PC or another device.

If the camcorder is turned off during formatting the inserted disc will become unusable.

HDD BD-RE RAM -RW (VR)

Protecting the HDD/

BD/DVD

(Protect HDD/Disc)

Although previously recorded movies will not be erased by recording new movies, a protect setting will ensure against accidental erasure and formatting. If the protect setting is activated, however, you will not be able to make new recordings until the protect setting is canceled.

Insert the disc you want to protect

1(if the medium you want to protect it not the HDD).

2Press DISC NAVIGATION, then press MENU.

Select “HDD Setting” or “Disc Setting”

For “HDD Setting”, select “Protect

HDD” then press the confirmation

3button. Likewise, for “Disc Setting”, select “Protect Disc”, then press the confirmation button.

The confirmation screen appears.

Select “Yes”, then press the confirmation button.

Select “No” to quit protecting. 4 • To cancel the protect setting,

repeat the same steps to select “Unprotect HDD” or “Unprotect Disc” in step 3.

Editing

105

Page 105
Image 105
Hitachi DZ-BD7HA, DZ-BD70A Protecting the HDD, Protect HDD/Disc, Editing 105, Insert the disc you want to protect