Hitachi DZ-BD7HA, DZ-BD70A instruction manual Jumping to a specified point to, Button

zJumping to a specified point to

	Select “Specify” in step		in
	“Jumping to the designated scene”
	(p.50), then press the confirmation
	button.
	The specify screen will appear.
		Total recording time of
		all selected scenes
1	Position of currently
	played back image
		Go To

CURRENT
Go To
ENTER TOP	END RETURN
Cursor	Cursor position

Select the desired point by time by pressing (/ '/ &/ %.

(: To select the beginning

': To select the end

&/ %once:

To move the cursor one minute back or forward for HDD (ten seconds for BD/DVD, one still for card)

Press and hold &/ %:

2To move the cursor in ten minutes increments for HDD (one minute for BD/ DVD, ten stills for card)

Go To

CURRENT

Go To

ENTER TOP END RETURN

(When the start of the selected scene is selected)

Press the confirmation button.

The camcorder will go to the

3specified point and enter playback pause mode.

•To start playback, press the confirmation button again.

Hints
• To cancel the “Go To” procedure
midway, press before going to
the specified point.
• With a card, the number of stills	Viewing
will appear at the “Top”, “Current”,
“End”, and “Go To” indicators.

Note

The cursor position is a rough estimate. The cursor may not move at even intervals.

51