Additional Information 141, Reset | Hitachi DZ-BD7HA, DZ-BD70A

	Symptom	Cause and Correction	Reference
	Symptom	Cause and Correction	page
			page

	Power turns off	Is the battery charged?
	immediately after being	Charge it.
	turned on.

	When power is
	turned on, the LCD
	screen will turn on		21
	and off.		21
	and off.

	The ACCESS/PC
	indicator is flashing,
	even though nothing
	is displayed on the
	LCD monitor screen.

	Power goes off	Is Power Save set to “On”?
	unexpectedly.	If the camcorder is on battery power and set to “Power
		Save: On”, and is left for up to 5 minutes (default setting)
		without being operated, it will automatically turn off to	60
		save battery power. To restart recording, turn the power
		off and then turn it on again. You can also specify “Power
		Save: Off” to stop automatic power off.

		Is the camcorder set to the sleep mode? If 30 minutes or
		more has elapsed with the camcorder in the sleep mode, it	40
		will automatically turn off. Set the power switch to	40
		will automatically turn off. Set the power switch to
		“OFF”, and then turn it on again.

	Power cannot be	Detach the battery or disconnect the AC adapter/charger,
	turned off.	reattach or reconnect the power source, and then press	37, 156
		RESET.

	Even if the	The camcorder will automatically turn on to recognize a
	camcorder is off,	disc. Closing the cover will automatically turn the
	opening the cover	camcorder off again.	33
	will cause the		33
	will cause the
	ACCESS/PC
	indicator to flash.

Additional Information

141

Image 141

Hitachi DZ-BD7HA, DZ-BD70A instruction manual Additional Information 141, Reset

Contents

Instruction DZ-BD7HA For Your Safety PrecautionsIdentifications of caution marks Page Important Safety Instructions Table of Contents Editing This camcorder makes all of the following possible „ Choosing a disc to suit your purpose IntroductionRe-recordable One-time recording Re-recordable Recording/Dubbing SD Standard Definition image qualityRe-recordable One-time Recording Operations Descriptions used in this manual About joystick operation and symbols About media descriptions Before Using the Product Be sure to read this information DZ-ACS3 Checking Provided Accessories Names of Parts Viewfinder side Use the Guide button for help Lens side Automatic lens coverLens hood Stereo microphone Remote control Adjusting the hand strap How to Open and Use the LCD Monitor You can use the LCD monitor as follows180 Recording/Playing Using the Viewfinder How to use the viewfinderPull out the viewfinder until it clicks „ Setting up the battery pack Charge status of the battery packLet’s Get Started „ Changing the display language „ Turning on the Power „ Setting the date and time Open the LCD monitor p.19 Press MenuSet time and date appear in the LCD monitor Recording Movies to a BD DZ-BD7HA Recording Stills to an SD card Hint Playing Recorded Movies/Stills Deleting Recorded Movies/Stills Functions and Characteristics of HDD/BD/DVD/Cards Media FunctionCard Usable discs and their logos Function „ About HDD/BD/DVD Unusable Discs „ About cards „ Cautions for discs and cardsUsable card and logo Function When a new BD-RE, BD-R, or DVD-RW is inserted, see p.35 Wall outlet Turn the power switch to OFFAttach the charged battery pack to „ Inserting a BD or DVD Removing the disc „ When loading a new BD-RE/BD-R/DVD-RW When using a DVD-RWOpen the LCD monitor „ Continuous recording time with a fully charged battery Battery Pack„ Charge lamp status and charging time Connect to the AC adapter/charger Power cable „ Connecting the camcorder to a wall outletCamcorder DC power cord Charger AC Plug Adapter not supplied Battery life „ Efficient Use of the Battery Switch to on RecordingRecord button See next Again. The elapsed recording time will be reset „ Using the Quick Start FunctionWill also light red Again Hints See the next page for details On-Screen Information HDD REM XX Hour XX MIN*5 SD Card indicator lights Switch to OFF, to turn off Using the Quick Start function Hints „ Playing back the last recorded scene ViewingPress the confirmation button „ Choosing and playing back a scene „ Deleting the last recorded sceneDate separator line Operation guide Currently selected scene „ Choosing and playing back multiple scenes SettingSelect a scene by pressing &/% Then press Select „ Jumping to the designated scene You want to cancel and press SelectThen select Select by pressing Press %or the confirmation button Jumping to a specified point to ButtonSelect the desired point by time by pressing / / &/ % Decreases the volume Increases the volume „ Adjusting speaker volume during movie playback„ Information Display During Playback No display Playback information display When using When using CardViewing Movies During playback pause Movies During playback Still pictures During card playback Select Playback Setting by pressing /, then press %„ Playing still pictures on a card Automatically Slide Show Press Menu on the disc navigation screen p.48 „ Capturing a still picture from a movie Photo Capture „ Playing back scenes Repeatedly Repeat PlaySelect Edit by pressing /, then press % Example How to Operate the MenuVarious Recording Techniques EVF Display Date Setup Date Mode Program AE White Balance Camera Functions SetupMenu While Recording Movie menu Menu items 1st level Menu items 2nd level See Power Save Initial Setup Record LED Language Demo Mode ResetStills menu Setting the Date and Time „ How to use the LCD/EVF setup and initial setupSetup Various Recording Techniques „ About the demonstration function Changing the date format Setting the digital zoom Magnified Recording Optical Zoom Digital ZoomDigital zoom options Recording at Close Range Macro Recording Recording at close rangeSide until the wide-angle is Maximized Conversion lens Attaching the separately sold lenses Focusing range Adjusting the Focus Manually Manual FocusHow to focus manually During recording pause or recording, press Focus Adjusting Brightness Image Exposure Adjusting the exposure manuallyDifficult auto focus conditions Compensating for backlight Adjust the exposure by pressing &/ %During recording pause or recording, press Exposure Exposure Bar Recording mode Selecting a Recording Mode to Match Conditions Program AEDuring recording pause or recording, press BLC Backlight compensation icon During recording pause, press Menu Selecting a recording modeRepeat steps 1 to 3 on the left Lens White balance mode Selecting a white balance modeInfrared sensor Select Camera Functions Setup „ Setting the white balance manually SetWhite Balance Set Press the confirmation button Press to end, or to redo, repeat step Turning EIS Off/On Displaying Recording Guidelines Auxiliary LineEIS On/Off Function Default See Turning the MIC. filter On/OffDuring recording pause or recording, press Full Auto Flash mode Using the FlashSelecting a flash mode Flash a flash mode Turning Off Recording Indicator Beneath the Lens Select Initial Setup RecordLED Off/On BD Movie Quality HD Video Mode Recording Time HD Video ModeDVD Movie Quality SD Video Mode Recording Time Switching Movie Quality Self Timer On Using the Self-TimerMenu Photo or To MIC Jack Correct Incorrect Dubbing options Time required for dubbingDiscs and picture quality for dubbing Dubbing on BD/DVD DZ-BD7HA Before you begin When dubbing to a BD with HX Video Mode SceneHints for dubbing No auto divide About the playlist p.94 for dubbing First Dubbing New Select Execute, then press Dubbing All Scenes Recorded on the Same Day Date Select All, then press Confirmation button Dubbing All Scenes Recorded on the HDD All It into the camcorder p.33 When another disc is needed to When another disc is needed to Category Settings Not Dubbed Scenes On Thumbnails CategoryTo set Category Editing the original data Convenient playbackOther editing Editing Menu Items for the Disc Navigation Contents DVD „ Menu flows for the disc navigation When using HDD DZ-BD7HA/BD-RE/DVD-RAM/DVD-RW VR mode When using a card When using BD-R/DVD-RW VF Video mode/DVD-R Choosing Scenes by Date „ Switching to the display arranged by date DatePress Disc NAVIGATION, then press Menu Plays back in the order 10/1/200711/1/2007 Playlist 1 created Playlist „ What is Playlist? „ Creating a new Playlist Create Playlist Select Edit Create PlaylistThen press the confirmation button „ Displaying a desired Playlist Playlist „ Adding scenes to a Playlist EditEditing a playlist Wish to delete by pressing &/ % „ Deleting scenes from Playlist EditChoose the desired insertion position by pressing &/ % Scene to be Insertion Added Position „ Deleting a Playlist Delete „ Arranging the order of scenes in the Playlist EditThen press Menu Select Yes, then press Confirmation button Dividing a Movie Edit Divide When you reach the desired point Division, press SelectFor a card For others 100 Combining Multiple Scenes Edit -CombineSelect the scenes you want to combine, then press Menu Button.Combine, then press the confirmation Adding Special Effects Edit -Fade Editing 101Select Scene Edit Fade „ Jumping to the Top/End Go To Go ToLocking Scenes on a Card Lock 102 Editing 103 To unlock the scenePress to quit Formatting the HDD When using the HDD/BDFormat HDD/Disc Card 104 Protect HDD/Disc Protecting the HDDEditing 105 Insert the disc you want to protect 106 Checking Remaining Recording Capacity on MediumTwice Insert the medium you want to check except for the HDD Viewing on the Other Devices „ Connecting to a TVViewing on the Other Devices 107 Hdmi terminal Component Terminal S-Video terminal 108 Connecting the camcorder to your TV’s component input Audio Input Video AV/S cable Red White yellow Supplied Viewing on the Other Devices 109 110 Viewing on your TV Viewing on the Other Devices 111 Viewing on Other Players Recorders 112 To play back a BD-R/ DVD-RW VF mode/ DVD-RInsert the disc into the BD/DVD Insert the disc into the camcorder Play it back Finalizing a Disc Before you begin Power the camcorderViewing on the Other Devices 113 Press Disc NAVIGATION, and then press Menu Disc Setting Unfinalize Disc Using the Finalize button to finalize a discUnfinalizing a Disc 114 Connecting to your PC 115 About the software includedImageMixer 3 HD Edition for Bdcam PC requirements Connecting to your PC116 Memory Connecting to your PC 117 „ Software installation 118 Click Perform installationSelect your country’s video system Important Notice „ Connecting the camcorder to your PC Connecting to your PC 119Turn on the camcorder power Removing replacing Camcorder indications on the PCRemoving SD memory card 120 Connecting to your PC 121 Detach the PC connection cable from the PCConfirm the device again and click 122 Launch ImageMixer 3 HD Edition forSelect Hitachi Bdcam Import images to the PC Connecting to your PC 123To play back Play back the imported images Album 124Smart album Create a new album 125 Creating a smart album to automatically assemble images 126 Creating a disc with the images recorded by the camcorderLoad a disc into the disc drive Create a disc creation list DVD-Video’s list setup screen Set up the disc you are creating127 Register images to the disc creation list Write to the disc 128 Connecting to your PC 129 „ Uninstalling Software 130 Precautions When Connecting to a PC 131 Optional Accessories Message Cause & Troubleshooting Reference Error MessagesAdditional Information 132 133 134 135 136 Additional Information 137 138 Additional Information 139 Power supplies TroubleshootingSymptom Cause and Correction Reference 140 Additional Information 141 Reset During recording 142 During playback 143 Additional Information 144 145 When the camcorder is connected to a PC Disc Eject 146 Miscellaneous Additional Information 147 148 Card Access Additional Information 149 150 Additional Information 151 Do not use a generally available 8 cm CD lens cleaner 152Do not expose the camcorder to insecticide Cleaning the surface of the camcorder CleaningUsing HDD/discs Additional Information 153 Disc Cleaning Additional Information 154Storing discs Additional Information 155 System Reset List of setting items156 Additional Information 157 End User License Agreements for Operating system Software 158 End User License Agreements for Operating system Software Additional Information 159 160 No Warranty Copyright year name of author Additional Information 161 GNU Lesser General Public License Version 2.1, February 162 Modified work must itself be a software li- brary Additional Information 163 Library will still fall under Section 164 Additional Information 165 166 How to Apply These Terms to Your New Libraries Additional Information 167 Major Specifications DVD-RW VF 168 Additional Information 169 Storage capacity of HDD/BD/DVD/CardRecordable time on HDD Recordable time on BD 170 Still’s file sizeRecording media Additional Information 171 Glossary VF Video mode VR modeAdditional Information 172 Additional Information 173 Index HDD 174 Additional Information 175 License Agreement 176 Additional Information 177 Service Hotline 1-800-HITACHIPage Only Only Hitachi Or mail this portion to the following address