Hitachi DZ-BD70A, DZ-BD7HA instruction manual Attaching the separately sold lenses, Conversion lens

Various Recording Techniques

HDD BD-RE BD-R RAM -RW (VR) -RW (VF) R CARD

Using the Separately- Sold Lenses to Increase the Wide- Angle or Telephoto Effect

Use the tele-conversion lens (DZ- TL43 (separately-sold) to increase the telephoto effect, and the wide- conversion lens DZ-WL43 (separately-sold) to increase the wide-angle effect.

If you choose another model, make sure the filter diameter is 43mm and the screw pitch 0.75mm.

Attaching the separately sold lenses

Remove the lens cap from the conversion lens and attach the conversion lens to the camcorder

1 Conversion lens

Notes

•If you attach the DZ-TL43 conversion lens, the focusing range at the T (telephoto) side will be from approx. 9.84 feet (3 m) to infinity.

•When the tele-conversion lens or wide-conversion lens is used, the white balance may not function depending on recording conditions. (Normally, the white balance will be automatically adjusted.) In this event, adjust the white balance manually (p.71).

•When you zoom while the conversion lens is attached, the four corners of the screen may become a little dark or scratchy at the W (Wide) side. (The four corners may not be evenly dark.)

•When changing lenses, be careful not to drop the camcorder.

•Attaching a conversion lens will prevent you from using the flash. Turn the “Flash” setting to “Off” (p.74).

•Some commercially sold conversion lens may not be compatible with this camcorder.

64