Miscellaneous

Symptom

Cause and Correction

Reference

page

 

 

 

 

 

The camcorder does

Is a fully charged battery attached?

 

not work.

Is the camcorder powered from an AC outlet?

21, 37

 

Connect a power source.

 

 

 

 

Power does not come

Press RESET, then turn on the power again.

156

on, or no operation

 

 

Has the camcorder been subjected to impact?

 

occurs by pressing

The camcorder could be damaged. Consult your dealer.

any button.

 

 

 

 

 

 

The date and time

Has the camcorder been left unused for a long period of

 

are incorrect.

time?

60

 

The internal backup memory battery may be discharged.

 

 

 

Connect the AC power adapter/charger to recharge it.

 

 

 

 

Pressing QUICK

The camcorder enters sleep mode when QUICK

 

START does not

START is pressed only while in recording pause mode.

 

enter sleep mode.

Check the following causes:

 

 

- there is no disc in the camcorder while the power

 

 

switch is set to “BD/DVD”.

 

 

- there is no SD memory card in the camcorder while

40

 

the power switch is set to “SD CARD”.

 

 

 

- the HDD, disc, or card does not have sufficient

 

 

remaining free space.

 

 

- An usable disc or card is inserted.

 

 

- the disc navigation screen is appearing.

 

 

- during playback

 

 

 

 

No scene can be

Is the cursor placed on the scene to be deleted?

 

deleted.

If the selected scene is framed in red, it can be deleted,

 

 

even if you use yellow cursor to select the scene. Check

99

 

the colors of the cursor and bar graph on the thumbnail

 

 

screen.

 

 

 

 

Disc cannot be

Did you detach the battery or AC adapter/charger before

 

removed.

setting the power switch to “OFF”?

 

(Cover will not

Isn’t the camcorder powered off because the battery pack

 

open.)

is empty?

 

 

Is the battery charged?

 

 

Connect a charged battery or the AC adapter/charger to

21, 37

 

the camcorder, and then turn the power switch to “OFF”,

 

 

 

then press down the DISC EJECT switch.

 

 

Isn’t the power switch set to “ON”? Turn the power

 

 

switch to “OFF”, and then press the DISC EJECT

 

 

switch.

 

 

 

 

Additional Information

147

Page 147
Image 147
Hitachi DZ-BD7HA, DZ-BD70A instruction manual Additional Information 147, Miscellaneous