Hitachi DZ-BD7HA, DZ-BD70A instruction manual Using the Self-Timer, Self Timer On, Menu, Photo or 

3

Press the confirmation button to confirm, then MENU to end.

The selected movie quality will be displayed in the LCD monitor (p.42).

•The movie quality setting is retained in memory even if the power is turned off.

•When a BD is loaded in the camcorder, and the BD is replaced with another BD, the movie quality setting will not change.

•When a DVD is loaded in the camcorder, and the DVD is replaced with another DVD or a double-sided DVD is reversed, the movie quality setting will not change.

•When a DVD is replaced with a BD, the movie quality will be changed to the most recent BD setting (and vice versa).

CARD

Using the Self-Timer

You can use the self-timer to record still photos.

1During still picture recording pause, press MENU.

2Select “Record Functions Setup”

“Self Timer” “On”

Press the confirmation button to confirm, then MENU to exit the

3menu.

The self-timer is set and “<10” appears in the LCD monitor (p.42).

Press PHOTO halfway to adjust the focus, then press it all the way down.

A countdown starts. In the LCD monitor, the countdown is shown as follows: “<10”, “<9”, …. The photo will be recorded about 10 seconds later.

During countdown, the recording indicator on the lens side also flashes.

•To cancel the countdown and

4 return to “<10”, press

PHOTO or .

•The self-timer operates every time PHOTO is fully pressed and will not be set to “Off” until the following is conducted:

–Set the self-timer to “Off” in the menu.

–Turn off the power.

–Switch to movie recording.

Various Recording Techniques

77