Hitachi CU-HD1000 SD-SETTING menu, ECC filter indication, PIX OUT camera status display

Function menu

SD-SETTING menu

■ＳＤ ＳＥＴＴＩＮＧ

ＯＵＴＰＵＴ	：ＲＧＢ
ＣＯＭＢ ＦＩＬＴＥＲ：ＯＦＦ
ＡＳＰＥＣＴ	：１６：９
ＷＦＭ	：ＥＮＣ

ＣＯＭＰ ＳＥＴＵＰ ：ＯＦＦ Ｒ－Ｙ／Ｂ－Ｙ ＬＥＶ：１００%

Item	Setting	Factory setting		Description
OUTPUT	RGB, COMP	RGB	Set output signals from the COMPONENT/RGB
			connector.
			RGB	: Outputs the R, G, and B signals.
			COMP : Outputs the Y, Pb, and Pr signals.
COMB FILTER	OFF, ON	OFF	Turns on/off a comb filter.
ASPECT	16:9,4:3	16:9	Select the SD aspect ratio.
WFM	R, G, B, ENC, SUP, SEQ	ENC	Set the WFM output (Analog Video output) and WFM
			CONTROL (Control Signal output).
			SD-SDI, the HD-SDI output, and WFM CONTROL
			are connected with a SDI Waveform monitor,
			the control synchronizes with the Waveform monitor.
			*Please see 19 page "Service information - WFM
			CONTROL" in detail.
COMP SETUP	OFF, ON	ON(NTSC)	Turns on/off the setup of an analog component Y
		OFF(PAL)	signal.
R-Y/B-Y LEV	100%, 75%	100%(NTSC)	Set the 100%/75% of the analog component
		75%(PAL)	R-Y/B-Y signal.

ECC filter indication

When the FILTER setting is ON, the ECC filter is displayed at the lower center of the screen. The display depends on the optical filter position.

ECC_FILTER	A.3200K	Displays ECC filter information with
	B.4300K	optical filter 1.
	C.5600K
	D.6300K
	E.8000K
PIX OUT camera status display

１．３２００Ｋ Ａ．３２００Ｋ Ｆ８．０

Optical filter

Lens iris

ECC filter

13