Service information

1.) Please set or change the TCP/IP protocol properties of the PC to “Obtain an IP address automatically” because the IP Address initialization of CU-HD1500 is an automatic acquisition mode.

If the CCU has set IP address, the PC has to be set “Use the following IP address” then input the IP address, Subnet mask, and Default gateway.

2.) Connect the CU-HD1500 to the PC as shown in the above figure. Execute the Lantronix DeviceInstaller application by START > ALL PROGRAMS > LANTRONIX > DeviceInstaller

4.2> DeviceInstaller.

3.) Click on "Search" to display the current IP Address of the connected CU-HD1500. The right pane will show the CU-HD1500 TCP/IP Network Settings.

27

Page 41
Image 41
Hitachi CU-HD1500 operating instructions DeviceInstaller