Hitachi CU-HD1500 operating instructions ．DC power supply operation

System Configuration

3．DC power supply operation

By carrying out the external input of the camera side power supply, long-distance cable transmission becomes possible.

Directions for operation are as follows.

1)Between CU-HD1500 (camera control unit) is connected with CA-HF1500 (camera adaptor) by a single mode fiber cable.

2)The power supply of CU-HD1500 is switched on.

3)The menu of CU-HD1500 is displayed.

4)"CABLE MODE" of a CU-FUNCTION menu is set as SINGLE.

(*）The selection only of the time of STBY mode(CAM POWER:OFF) is attained.

5)A power supply is inputted into the DC IN connector of CA-HF1500. 6）PWR SW of CA-HF1500 is set as EXT.

■CU-FUNCTION

BUZZER	:ENABLE
SDI AUDIO	:OFF
CCU ID	: 1
CABLE MODE: SINGLE
SYS FORMAT	1080i
	59.94Hz
TIME/DATE:	'12.01.01
	12:00

CU-FUNCTION MENU SCREEN

AC input

	DC12V	Optical Cable
			Camera control unit
		SINGLE
Camera Head Camera Adaptor
			CU-HD1500
SK-HD1500 CA-HF1500
		AC/DC
		converter

AC input

Remote Control Unit

RU- 1500

8