English

PRECAUTIONS ON USING ROTARY HAMMER

1.Wear ear protections

Exposure to noise can cause hearing loss.

2.Do not touch the bit during or immediately after operation. The bit becomes very hot during operation and could cause serious burns.

3.Before starting to break, chip or drill into a wall, floor or ceiling, thoroughly confirm that such items as electric cables or conduits are not buried inside.

4.Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.

5.Always hold the body handle and side handle of the power tool firmly. Otherwise the counterforce produced may result in inaccurate and even dangerous operation.

6.Wear a dust mask

Do not inhale the harmful dusts generated in drilling or chiseling operation. The dust can endanger the health of yourself and bystanders.

SPECIFICATIONS

Voltage (by areas)*

(110 V, 115 V, 120 V, 127 V, 220 V, 230 V, 240 V)

 

 

Power input

850 W*

No-load speed

0 – 850 min-1

Full-load impact rate

0 – 3700 min-1

Capacity: concrete

4 – 30 mm

steel

13 mm

wood

32 mm

Weight (without cord and side handle)

4.3 kg

*Be sure to check the nameplate on product as it is subject to change by areas.

STANDARD ACCESSORIES

 

(1)

Plastic case .................................................................

1

(2)

Side handle ................................................................

1

(3)

Stopper ........................................................................

1

(4)

Dust cup .....................................................................

1

(5)

Syringe ........................................................................

1

Standard accessories are subject to change without notice.

OPTIONAL ACCESSORIES (sold separately)

1. Drilling anchor holes (rotation + hammering)

Drill bit (Taper shank) and taper shank adapter

Drill bit (Taper shank)

Taper shank adapter

 

 

 

(SDS-plus shank)

 

 

 

Cotter

 

 

Outer diameter

Taper mode

Applicable drill bit

 

 

 

 

11.0 mm

Morse taper (No.1)

Drill bit (taper shank)

11.0 ~ 17.5 mm

Morse taper (No.2)

Drill bit (taper shank)

21.5 mm

12.3 mm

12.7 mm

A-taper

Taper shank adapter formed A-taper or B-taper

14.3 mm

B-taper

is provided as an optional accessory, but the

14.5 mm

drill bit for it is not provided.

 

17.5 mm

 

 

 

21.5 mm

 

 

 

6